Some tips on 25021-08-3

25021-08-3 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid 319935, apyrrolines compound, is more and more widely used in various.

25021-08-3, 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The carboxylic acid of ligand HL was activated according to a published procedure [16] . Briefly, a solution of HL (48?mg, 0.309?mmol) and DCC (64?mg, 0.309?mmol), dissolved in 1?mL of anhydrous DMF, was sonicated in an ultrasonic bath for 15?min at room temperature. The colorless solution became dark red and a white solid (dicyclohexylurea, DCU) precipitated. Then the precipitate was separated by centrifugation and the supernatant was added very slowly (dropwise for 30?min) to a suspension of (OC-6-44)-diamminedichloridohydroxido(2-hydroxyethanolato)platinum(IV), 2, (100?mg, 0.276?mmol) in 5?mL of anhydrous DMF. The reaction was carried out overnight at room temperature. The mixture was then cooled to -20?C for about 30?min and the precipitate was eliminated by filtration (PTFE filter with a porosity 0.45?mum). The solvent was evaporated by a rotary evaporator and the yellow oil obtained was dissolved in ultrapure water, in order to allow the precipitation of the remained DCU. The yellow solution was filtered (0.45?mum porosity), the water was removed under reduced pressure and the reaction product was precipitated with acetone/diethyl ether and then dried in vacuo. Yield: 83?mg (60%). 1H NMR (D2O) delta: 1.19 (t, 3H, -OCH2CH3, 3J?=?6.95?Hz), 3.43 (q, 2H, -OCH2CH3, 3J?=?6.95?Hz), 4.39 (s, 2H, -OCOCH2), 6.97 (s, 2H, -NCOCH=CH) ppm; 13C NMR (D2O) delta: 16.1 (-OCH2CH3), 40.0 (-OCOCH2), 67.7 (-OCH2CH3), 134.7 (-NCOCH=CH), 172.4 (-NCOCH=CH), 176.3 (-OCOCH2) ppm; 195Pt NMR (D2O) delta: 904?ppm (multiplet of five lines, 1JPt-N?=?197.4?Hz). ESI-MS (positive ion mode): 500?m/z [M?+?H]+, calcd for C8H16Cl2N3O5Pt [M?+?H]+ 500?m/z. Elem. Anal. found: C 19.58; H 3.24; N 8.13%.; calcd. for C8H15Cl2N3O5Pt: C 19.25; H 3.03; N 8.42%.

25021-08-3 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid 319935, apyrrolines compound, is more and more widely used in various.

Reference£º
Article; Gabano, Elisabetta; Perin, Elena; Bonzani, Diego; Ravera, Mauro; Inorganica Chimica Acta; vol. 488; (2019); p. 195 – 200;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Downstream synthetic route of 134272-64-3

As the paragraph descriping shows that 134272-64-3 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.134272-64-3,N-(2-Aminoethyl)maleimide Hydrochloride,as a common compound, the synthetic route is as follows.

Step 2: To a solution of the NHS ester, compound 6a (12.3 mg, 0.011 mmol) and N-(2-aminoethyl)maleimide hydrochloride (2.0 mg, 0.011 mmol) in anhydrous dichloromethane (0.3 mL) was added DIPEA (0.0022 mL, 0.013 mmol). The mixture was stirred at room temperature for 3 hours then it was stripped under reduced pressure. The residue was purified by semi-preparative reverse phase HPLC (CI 8 column, CH3CN/H2O). The fractions that contained pure product were combined, frozen and lyophilized to give the desired maleimide, compound D6 (10 mg, 80% yield). LCMS = 8.3 min (15 min method). MS (m/z): 1181.8 (M + 1)+.

As the paragraph descriping shows that 134272-64-3 is playing an increasingly important role.

Reference£º
Patent; IMMUNOGEN, INC.; CHITTENDEN, Thomas; DECKERT, Jutta; HICKS, Stuart, William; LAI, Katharine, C.; PARK, Peter, U.; RUI, Lingyun; TAVARES, Daniel, J.; KOHLI, Neeraj; (274 pag.)WO2018/129029; (2018); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Simple exploration of 25021-08-3

25021-08-3 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid 319935, apyrrolines compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.25021-08-3,2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid,as a common compound, the synthetic route is as follows.

General procedure: A mixture of compound [3-7]a-i (0.01mole) and thionyl chloride (0.01mole) placed in dry benzene (10 ml.) and refluxed for 7 hours. The excess of thionyl chloride and benzene were removed under vacuum after cooling .

25021-08-3 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid 319935, apyrrolines compound, is more and more widely used in various.

Reference£º
Article; Samir, Ali H.; Saeed, Ruwaidah S.; Matty, Fadhel S.; Oriental Journal of Chemistry; vol. 34; 1; (2018); p. 286 – 294;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Downstream synthetic route of 766-36-9

As the paragraph descriping shows that 766-36-9 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.766-36-9,3-Ethyl-4-methyl-2,5-dihydro-1H-pyrrol-2-one,as a common compound, the synthetic route is as follows.

EXAMPLE 7 trans-6-Cyano-3,4-dihydro-2,2-dimethyl-4-(3-ethyl-4-methyl-2-oxo-3-pyrrolin-1-yl) -2H-benzo[b]pyran-3-ol 2.4 g (0.08 mol) of 80percent NaH are introduced into a solution of 14.4 g (0.072 mol) of trans-3-bromo-6-cyano-3,4-dihydro-2,2-dimethyl-2H-benzo[b]pyran -4-ol in 200 ml of DMSO. The mixture is stirred for one hour at 20¡ã C., and 3.6 g (0.12 mol) of 80percent NaH and 15 g (0.12 mol) of 3-ethyl-4-methyl-2-oxo-3-pyrroline are introduced. The reaction mixture is stirred at 40¡ã C. for three hours and then introduced into ice water, and the product is filtered off with suction, dried and chromatographed on a silica gel column using methylene chloride/methanol (95: 5). The product obtained in this way crystallizes from a little ethanol. Crystals of melting point 207¡ã-208¡ã C. C19 H22 N2 O4 (326,41) calc. C 69.92;H 6.80;N 8.58; found C 70.0;H 6.7;N 8.6;

As the paragraph descriping shows that 766-36-9 is playing an increasingly important role.

Reference£º
Patent; Hoechst Aktiengesellschaft; US5043344; (1991); A;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Some tips on 134272-64-3

134272-64-3 N-(2-Aminoethyl)maleimide Hydrochloride 22118207, apyrrolines compound, is more and more widely used in various.

134272-64-3, N-(2-Aminoethyl)maleimide Hydrochloride is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

NHS ester, compound 5a (8.2 mg, 7.6 muiotaetaomicron) and l-(2-aminoethyl)-lH-pyrrole-2,5- dione hydrochloride (2.2 mg, 0.011 mmol) were dissolved in anhydrous dichloromethane (305 mu) at room temperature. DIPEA (2.66 mu, 0.015mmol) was added and the reaction and was stirred for 3.5 hours. The reaction mixture was concentrated and was purified by RPHPLC (CI 8 column, CH3CN/H20, gradient, 35% to 55%). The desired product fractions were frozen and lyophilized to give maleimide, compound D5 as a solid white powder (5.3 mg, 58% yield). LCMS = 5.11 min (8 min method). MS (m z): 1100.6 (M + 1)+.

134272-64-3 N-(2-Aminoethyl)maleimide Hydrochloride 22118207, apyrrolines compound, is more and more widely used in various.

Reference£º
Patent; IMMUNOGEN, INC.; CHITTENDEN, Thomas; DECKERT, Jutta; HICKS, Stuart, William; LAI, Katharine, C.; PARK, Peter, U.; RUI, Lingyun; TAVARES, Daniel, J.; KOHLI, Neeraj; (274 pag.)WO2018/129029; (2018); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Downstream synthetic route of 25021-08-3

As the paragraph descriping shows that 25021-08-3 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.25021-08-3,2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid,as a common compound, the synthetic route is as follows.

Complex (OC-6-44)-acetatodiamminedichloridohydroxidoplatinum(IV), 3, (56?mg, 0.15?mmol) suspended in 1?mL of DMF was added to a solution of activated ligand HL (0.74?mmol) in 1?mL of DMF (see above). The mixture reacted for 24?h at room temperature. Then, the precipitate was discarded by centrifugation and the solvent removed by means of a rotary evaporator. The residue was dissolved in 200?muL of methanol and precipitated by adding 25?mL of diethyl ether. The crystalline solid is washed with diethyl ether. Yield: 43?mg (56%). 1H NMR (DMSO-d6) delta: 1.91 (s, 3H, CH3), 4.17 (s, 2H, CH2), 6.49 (m, 6H, NH3), 7.09 (s, 2H, CH) ppm; 13C NMR (DMSO-d6) delta: 22.5 (CH3), 47.5 (CH2), 134.8 (CH), 170.4 (NC(O)), 174.4 (OC(O)CH2), 178.0 (OC(O)CH3) ppm; 195Pt NMR (DMSO-d6) delta: 1230?ppm. ESI-MS (positive ion mode): 514?m/z [M?+?H]+, calcd for C8H14Cl2N3O6Pt [M?+?H]+ 514?m/z. Elem. Anal. found: C 18.96; H 2.78; N 7.93%; calcd. for C8H13Cl2N3O6Pt: C 18.72; H 2.55; N 8.19%.

As the paragraph descriping shows that 25021-08-3 is playing an increasingly important role.

Reference£º
Article; Gabano, Elisabetta; Perin, Elena; Bonzani, Diego; Ravera, Mauro; Inorganica Chimica Acta; vol. 488; (2019); p. 195 – 200;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Brief introduction of 1122-10-7

The synthetic route of 1122-10-7 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1122-10-7,3,4-Dibromo-1H-pyrrole-2,5-dione,as a common compound, the synthetic route is as follows.

NaOAc (0.42 mL, 5.10 mmol) and thiophenol(0.91 mL, 9.02 mmol) were added to a stirred solutionof 3,4-dibromomaleimide (1.00 g, 3.92 mmol) in MeOH (40 mL). After 30 min of stirring at roomtemperature the mixture was concentrated to dryness and the crude residue waspurified by column chromatography (5% to 20% EtOAc/petrol) to yield the title compound as a yellow solid (0.90mg, 2.87 mmol, 73%). m.p. 108-110 C; nmax(cm-1) 3274, 1774, 1719, 1329,1042, 741; dH (CDCl3, 600MHz) 7.29 (2H, t, J = 7.2 Hz, ArH), 7.25 (4H, t, J = 7.2Hz, ArH), 7.19 (4H, d, J = 7.2 Hz, ArH); dC (CDCl3, 150 MHz) 166.3 (s), 136.7(s), 131.9 (d), 129.1 (d), 128.8 (s), 128.6 (d); HRMS (EI): Mass calculated for C16H10O2NS2312.0153, observed: 312.0153.

The synthetic route of 1122-10-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Castaneda, Lourdes; Wright, Zoe V.F.; Marculescu, Cristina; Tran, Trang M.; Chudasama, Vijay; Maruani, Antoine; Hull, Elizabeth A.; Nunes, Joao P.M.; Fitzmaurice, Richard J.; Smith, Mark E.B.; Jones, Lyn H.; Caddick, Stephen; Baker, James R.; Tetrahedron Letters; vol. 54; 27; (2013); p. 3493 – 3495;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

New learning discoveries about 1122-10-7

As the paragraph descriping shows that 1122-10-7 is playing an increasingly important role.

1122-10-7, 3,4-Dibromo-1H-pyrrole-2,5-dione is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Synthesis of 1-(2-(2-azidoethoxy)ethyl)-3,4-dibromo-1H-pyrrole-2,5-dione To 2.5 g of 3,4-dibromo-1H-pyrrole-2,5-dione (10 mmol) and 1 g of NMM in 60 mL of THF, MeOCOCl (10 mmol, 940 mg in 10 ml DCM) was added dropwise, stirred for 20 min, then the reaction solution was diluted with 6o mL of DCM, washed 3 time by water, the organic phase was stirred by sodium sulfate anhydrous, concentrated, 2.65 g of methyl 3,4-dibromo-2,5-dioxo-2H-pyrrole-1(5H)-carboxylate was obtained. 311 mg, 1 mmol of this compound, 2-(2-azidoethoxy)ethanamine (130 mg, 1 mmol) and 5 mL DCM was added, TLC shown the reaction finished in 20 min, then extracted by DCM and brine, washed by NH4Cl solution, dried on sodium sulfate anhydrous, and then concentrated for column purification, flashed by 2:1 hexane and ethyl ethylate, 230 mg of 1-(2-(2-azidoethoxy)ethyl)-3,4-dibromo-1H-pyrrole-2,5-dione obtained. 1HNMR: 3.32 ppm (t, J=5.0 Hz, 1H), 3.40 ppm (t, J=5.0 Hz, 1H), 3.50 ppm (q, J=5.0 Hz, 1H), 3.62 ppm (t, J=5.0 Hz, 1H), 3.63-3.69 ppm (m, 3H), 3.84 ppm (t, J=5 hz, 1H). Fw: 365.9, C8H8Br2N4O3; Mass Peaks (1:2:1): 366.9, 368.9, 370.9.

As the paragraph descriping shows that 1122-10-7 is playing an increasingly important role.

Reference£º
Patent; Sorrento Therapeutics, Inc.; Fu, Yanwen; Kaufmann, Gunnar F.; Jones, Bryan; Toughiri, Rahaleh; (27 pag.)US2016/326266; (2016); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Downstream synthetic route of 541-59-3

As the paragraph descriping shows that 541-59-3 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.541-59-3,Maleimide,as a common compound, the synthetic route is as follows.

General procedure: To a solution of N-R-maleimide (10 mmol) in CCl4 (15 mL) was added dropwise a solution of Br2 (0.57 mL, 11 mmol) in CCl4 (10mL) at rt After the addition is completed, the reaction mixture was refluxed for 1 h and then cooled to room temperature. The solvent was evaporated in vacuo to give the crude trans-2,3-Dibromo-N-R-succinimide as pale-yellow solid. The crude succinimide was dissolved in THF (30 mL) and triethylamine (1.40 mL, 11 mmol) in THF (5 mL) was added dropwise at 0 oC.The resulting mixture was allowed to warm to room temperature and stirred for two h before concentrated in vacuo. The residue was dissolved in EtOAc and washed with H2O and brine. The organic layer was dried with anhydrous Na2SO4 and evaporated in vacuo to give bromo-N-R-maleimide (1)as pale-yellow solid with good yields.

As the paragraph descriping shows that 541-59-3 is playing an increasingly important role.

Reference£º
Article; Li, Xiangmin; Li, Hongxian; Yang, Wei; Zhuang, Jinchen; Li, Hao; Wang, Wei; Tetrahedron Letters; vol. 57; 24; (2016); p. 2660 – 2663;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Brief introduction of 1122-10-7

The synthetic route of 1122-10-7 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1122-10-7,3,4-Dibromo-1H-pyrrole-2,5-dione,as a common compound, the synthetic route is as follows.

Ac-Arg-Arg-Arg-Arg-Cys-Pro-Leu-Tyr-Ile-Ser-Tyr-Asp-Pro-Val-Cys-Arg-Arg-Arg-Arg-NH2 (2 mg) was dissolved in Dulbecco’s phosphate buffered saline (5 mL, without Ca, Mg) and acetonitrile (5 mL). 3,4-dibromomaleimide (0.2 mg, 1 eq.) was added to the solution, and the mixture was stirred for 1 h at room temperature. To the resulting mixture was added H2O (10 mL) and the solution was filtered and applied to the preparative HPLC, and linear density gradient elution (60 min) was then performed with eluents A/B: 75:25-65:35 using eluent A: 0.1% TFA in water and eluent B: 0.1% TFA-containing acetonitrile on preparative HPLC using YMC-Actus Triart Prep C8-S S-10mum 20 nm column (30 ¡Á 250 mm); flow rate: 15 mL/min. The fractions containing the product were collected and lyophilized to give 1.6 mg of peptide 15 as a yellow powder; mass spectrum: (M + H)+ 2655.54 (calcd 2655.38). Elution time on RP-HPLC: 8.05 min. Elution conditions: YMC Triart C8 column (4.6 ¡Á 100 mm), linear density gradient elution with eluents A/B = 80/20-30/70 (25 min), using 0.1% TFA in water as eluent A and 0.1% TFA-containing acetonitrile as eluent B; flow rate: 1 mL/min.

The synthetic route of 1122-10-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Niida, Ayumu; Sasaki, Shigekazu; Yonemori, Kazuko; Sameshima, Tomoya; Yaguchi, Masahiro; Asami, Taiji; Sakamoto, Kotaro; Kamaura, Masahiro; Bioorganic and Medicinal Chemistry Letters; vol. 27; 12; (2017); p. 2757 – 2761;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem