Category: pyrrolines

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.1334177-86-4, name is 1-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)-3-oxo-7,10,13,16,19,22,25,28-octaoxa-4-azahentriacontan-31-oic acid. Here is a downstream synthesis route of the compound 1334177-86-4. 1334177-86-4

1334177-86-4, EDCI hydrochloride (8 mg, 0.042 mmol) was added to a suspension of Maleimide-PEG8-acid (25 mg, 0.042 mmol) in dry CH2Cl2 (4 mL) under argon atmosphere. PBD 85 (42 mg, crude) was added straight away and stirring was maintained until the reaction was complete (3 hours). The reaction was diluted with CH2Cl2and the organic phase was washed with H2O and brine before being dried over MgS04, filtered and excess solvent removed by rotary evaporation under reduced pressure by rotary evaporation under reduced pressure. The product was purified by careful silica gel chromatography (slow elution starting with 100% CHCI3 up to 9:1 CHCl3/MeOH) followed by reverse phase HPLC to remove unreacted maleimide-PEG8-acid. The product 86 was isolated in 10% over two steps (6.6 mg). LC/MS 1 .16 min (ES+) m/z (relative intensity) 770.20 ([M + 2H]+ , 40%).

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 1334177-86-4

Reference£º
Patent; VAN BERKEL, Patricius Hendrikus Cornelis; HOWARD, Philip Wilson; (283 pag.)WO2016/166298; (2016); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

1122-10-7, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. An updated downstream synthesis route of 1122-10-7 as follows.

Example 2 Synthesis of 39-(3,4-dibromo-2,5-dioxopyrrolyl)-3,6,9,12,15,18,21,24,27,30,33,36-dodecaoxanonatriacontanoic acid A 100 mL two-necked round bottom flask was flame dried and cooled under nitrogen. The cooled flask was charged with 200 mg (0.296 mmol) of tert-butyl 39-hydroxy-3,6,9,12,15,18,21,24,27,30,33,36-dodecaoxanonatriacontanoate. Triphenylphosphine, 106 mg, was dissolved in about 5 mL anhydrous tetrahydrofuran in a vial, and the solution was added to the 100 mL flask via cannula under nitrogen. The 100 mL flask was cooled in an ice-water bath for 15 minutes. To the cooled solution was added 55 mg (0.217 mmol) 3,4-dibromopyrrole-2,5-dione with stirring until a clear solution was observed. DIAD, 58.3 muL, was added to the cooled reaction mixture, which was stirred in the ice bath for an additional 10 minutes. The reaction mixture was stirred and allowed to reach room temperature over about 20 hours, then concentrated on a rotary evaporator until dry, giving a yellow viscous oil, which was absorbed onto about 1 g silica gel and dry-loaded onto a Reveleris normal phase chromatography unit. The oil was eluted over a 12 g silica gel cartridge with a methanol:dichloromethane gradient from 1:0 to 9:1 over 28 column volumes. The fractions containing the desired product were pooled and concentrated to dryness. The purified product was suspended in 50:50 acetonitrile:water and lyophilized overnight to provide a clear light yellow viscous oil., 1122-10-7

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1122-10-7, you can also browse my other articles.

Reference£º
Patent; Igenica Biotherapeutics, Inc.; Jackson, David Y.; Ha, Edward; Probst, Gary D.; US2014/363454; (2014); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione, introduce a new downstream synthesis route., 1122-10-7

Synthesis of 1-(2-(2-azidoethoxy)ethyl)-3,4-dibromo-1H-pyrrole-2,5-dione To 2.5 g of 3,4-dibromo-1H-pyrrole-2,5-dione (10 mmol) and 1 g of NMM in 60 mL of THF, MeOCOCl (10 mmol, 940 mg in 10 ml DCM) was added dropwise, stirred for 20 min, then the reaction solution was diluted with 6o mL of DCM, washed 3 time by water, the organic phase was stirred by sodium sulfate anhydrous, concentrated, 2.65 g of methyl 3,4-dibromo-2,5-dioxo-2H-pyrrole-1(5H)-carboxylate was obtained. 311 mg, 1 mmol of this compound, 2-(2-azidoethoxy)ethanamine (130 mg, 1 mmol) and 5 mL DCM was added, TLC shown the reaction finished in 20 min, then extracted by DCM and brine, washed by NH4Cl solution, dried on sodium sulfate anhydrous, and then concentrated for column purification, flashed by 2:1 hexane and ethyl ethylate, 230 mg of 1-(2-(2-azidoethoxy)ethyl)-3,4-dibromo-1H-pyrrole-2,5-dione obtained. 1HNMR: 3.32 ppm (t, J=5.0 Hz, 1H), 3.40 ppm (t, J=5.0 Hz, 1H), 3.50 ppm (q, J=5.0 Hz, 1H), 3.62 ppm (t, J=5.0 Hz, 1H), 3.63-3.69 ppm (m, 3H), 3.84 ppm (t, J=5 hz, 1H). Fw: 365.9, C8H8Br2N4O3; Mass Peaks (1:2:1): 366.9, 368.9, 370.9., 1122-10-7

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 1122-10-7. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Sorrento Therapeutics, Inc.; Fu, Yanwen; Kaufmann, Gunnar F.; Jones, Bryan; Toughiri, Rahaleh; (27 pag.)US2016/326266; (2016); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 872-32-2, name is 2-Methyl-1-pyrroline, introduce a new downstream synthesis route., 872-32-2

General procedure: A mixture of 2-methyl-1-pyrroline (2.8 g, 33.7 mmol) and the corresponding cyclic phosphite 2a-2e (30.6 mmol) were stirred in toluene (5 mL) for 4-6 h at room temperature (conversion was checked by TLC or 31P NMR), the mixture was poured into 30 mL water, slowly acidified to pH 3 with 11 N HCl then quickly extracted with tert-butyl methyl ether (TBME) (3 .x. 20 mL). The aqueous phase was basified to pH 9-10 with NaOH pellets then extracted with CH2Cl2 (4 .x. 20 mL). The combined organic phases were dried over MgSO4, filtered and roto-evaporated to give the crude aminophosphonates 3a-3e as white powders which were then purified by SiO2 column chromatography with eluent CH2Cl2/EtOH 8/1.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 872-32-2. We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Gosset, Gae?lle; Cle?ment, Jean-Louis; Culcasi, Marcel; Rockenbauer, Antal; Pietri, Sylvia; Bioorganic and Medicinal Chemistry; vol. 19; 7; (2011); p. 2218 – 2230;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

25021-08-3, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.25021-08-3, name is 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid. An updated downstream synthesis route of 25021-08-3 as follows.

N-[(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetyl]-beta-alanine The title compound was prepared from commercially available (2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid by coupling with tert-butyl beta-alaninate hydrochloride (1:1) in the presence of EDCI/HOBt and N,N-diisopropylethylamine and subsequent deprotection with trifluoroacetic acid. LC-MS (Method 1): Rt=0.32 min; MS (ESIpos): m/z=227 (M+H)+.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 25021-08-3

Reference£º
Patent; Bayer Pharma Aktiengesellschaft; LERCHEN, Hans-Georg; REBSTOCK, Anne-Sophie; CANCHO GRANDE, Yolanda; MARX, Leo; STELTE-LUDWIG, Beatrix; TERJUNG, Carsten; MAHLERT, Christoph; GREVEN, Simone; SOMMER, Anette; BERNDT, Sandra; (684 pag.)US2018/169256; (2018); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.55750-48-6, name is Methyl 2,5-dioxo-2,5-dihydro-1H-pyrrole-1-carboxylate. A new synthetic method of this compound is introduced below., 55750-48-6

55750-48-6, To a solution of H-Dap (Boc) -OH (1.00 g, 4.9 mmol) in saturated NaHCO3(20 mL) at 0 was added compound 409 (2.30 g, 14.7 mmol) . The reaction was stirred at 0 for 1h, then warmed to r.t. and stirred for another hour. Then 1N KHSO4was added to adjust pH to 6 and the resulting mixture was extracted with EtOAc (2 ¡Á 50mL) . Combined organic layers were dried over Na2SO4, filtered, and concentrated to give compound 519 (0.42 g, 30%yield) . ESI m/z calcd for C12H15N2O6[M-H]-: 283.10, found 283.10.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 55750-48-6, you can also browse my other articles.

Reference£º
Patent; HANGZHOU DAC BIOTECH CO. LTD; ZHAO, Robert Yongxin; YANG, Qingliang; HUANG, Yuanyuan; ZHAO, Linyao; GAI, Shun; YE, Hangbo; LEI, Jun; XU, Yifang; CAO, Mingjun; GUO, Huihui; JIA, Junxiang; TONG, Qianqian; LI, Wenjun; ZHOU, Xiaomai; XIE, Hongsheng; BAI, Lu; CAI, Xiang; ZHUO, Xiaotao; ZHANG, Xiuzheng; ZHENG, Jun; (424 pag.)WO2019/127607; (2019); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.25021-08-3, name is 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid. An updated downstream synthesis route of 25021-08-3 as follows., 25021-08-3

250 mg (1.07 mmol) of tert-butyl 3-[2-(2-aminoethoxy)ethoxy]propanoate, 151 mg (0.974 mmol) of 2-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid, 224 mg (1.46 mmol) of 1-hydroxy-1H-benzotriazole hydrate and 224 mg (1.17 mmol) of 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride were dissolved in 5.0 ml of dimethylformamide. The reaction mixture was stirred at RT for 1 h. Ethyl acetate was added and the mixture was extracted twice with 5% strength citric acid solution and with saturated sodium bicarbonate solution. The organic phase was washed twice with saturated sodium chloride solution and dried over magnesium sulphate, and the solvent was evaporated under reduced pressure. The residue was purified by preparative RP-HPLC (column: Reprosil 250*40; 10mu, flow rate: 50 ml/min, MeCN/water/0.1% TFA). The solvents were evaporated under reduced pressure and the residue was dried under high vacuum. This gave 267 mg (64% of theory) of tert-butyl 3-[2-(2-{[(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetyl]amino}ethoxy)ethoxy]propanoate. LC-MS (Method 1): Rt=0.73 min; MS (ESIpos): m/z=371 (M+H)+.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid, you can also browse my other articles.

Reference£º
Patent; Bayer Pharma Aktiengesellschaft; LERCHEN, Hans-Georg; REBSTOCK, Anne-Sophie; CANCHO GRANDE, Yolanda; MARX, Leo; STELTE-LUDWIG, Beatrix; TERJUNG, Carsten; MAHLERT, Christoph; GREVEN, Simone; SOMMER, Anette; BERNDT, Sandra; (684 pag.)US2018/169256; (2018); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. An updated downstream synthesis route of 1122-10-7 as follows., 1122-10-7

General procedure: To the solution of dibromomaleimide 1a orN-methyldibromomaleimide 1b (1 mmol) in THF (20 ml)was added solution of the thiophenol (2.2 mmol) and triethylamine(2.2 mmol) in one portion. The resulting solutionwas stirred at room temperature for 1 h, then evaporated invacuo and the residue was redissolved in ethyl acetate-water(20 + 20 ml) mixture. The organic layer was separated,washed with aq. NaHCO3, dried over anhydrous Na2SO4and evaporated. The residue was purified by flash chromatography(ethyl acetate: petroleum ether 3:1)., 1122-10-7

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 3,4-Dibromo-1H-pyrrole-2,5-dione, you can also browse my other articles.

Reference£º
Article; Panov, Alexey A.; Lavrenov, Sergey N.; Simonov, Alexander Y.; Mirchink, Elena P.; Isakova, Elena B.; Trenin, Alexey S.; Journal of Antibiotics; vol. 72; 2; (2019); p. 122 – 124;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 6913-92-4, name is 1-Benzyl-3-pyrroline, introduce a new downstream synthesis route., 6913-92-4

6913-92-4, Was synthesised according to published methods:. To a solution of 1-benzyl-3-pyrroline (5.0 g, 31.40 mmol) in methanol (20 ml) cooled at 0C, water was added (5 ml) and H2S04 96% (2 ml). The solution was stirred 5 min. and 3-chloroperoxybenzoic acid (10.0 g, 40.56 mmol) was added in portions. The suspension was stirred at r.t. for 18 h. Methanol was evaporated and the aquose solution was neutralized with aq. NaOH 10 % until pH=7. The suspension was extracted with dichloromethane and the organic phase was washed with water and saturated solution of NaCl, dried over Na2SO4, filtered and concentrated to afford pure product (4.35 g, 80%) as yellow oil. 1H NMR (400 MHz, CDCl3): delta (ppm) 7.49-7.23 (m, 5H), 3.81 (s, 2H), 3.66 (s, 2H), 3.23 (d, J=12Hz, 2H), 2.72 (d, J=12Hz, 2H).

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 6913-92-4. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Laboratorios del Dr. Esteve S.A.; EP1849781; (2007); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 21724-96-9, name is 3-(4-Bromophenyl)-1H-pyrrole-2,5-dione, introduce a new downstream synthesis route., 21724-96-9

Preparation 2: (1/?,5S/1S,5/?)-1-(4-bromophenyl)-3-azabicyclo[3.1.0]hexane-2,4- dione (P2) Milled potassium hydroxide (6.29 g) was added in small portions to a stirred solution of trimethylsulfoxonium iodide (24.66 g) in anhydrous DMSO (224 mL). The resulting mixture was allowed to stir at room temperature for 1.5 h then 3-(4-bromophenyl)-1 H-pyrrole-2,5- dione (P1 , 14.12 g) dissolved in DMSO (90 mL) was then added dropwise and the resulting mixture was allowed to stir at room temperature for 20 minutes. Reaction temperature was brought to 0 ¡ãC and aqueous saturated NH4CI (150 mL) was slowly added, followed by Et2O (200 mL). After separation of the two phases, the aqueous layer was repeatedly extracted with Et2O (3 x 100 mL). Combined organic layers were washed with brine and then dried over Na2SO4. Evaporation of the solvent gave the crude title compound (9.61 g) which was used without further purification.MS (mlz): 265.1 [M-H]”., 21724-96-9

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 21724-96-9. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; GLAXO GROUP LIMITED; WO2007/22935; (2007); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem