Category: pyrrolines

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.872-32-2, name is 2-Methyl-1-pyrroline. Here is a downstream synthesis route of the compound 872-32-2. 872-32-2

General procedure: Keeping the temperature at about 0 ¡ãC, trifluoroacetic acid (0.95 mL, 12.5 mmol), KHF2 (585 mg, 7.5 mmol), and trifluoromethyltrimethylsilane (1.9 mL, 12.5 mmol) were successively added to a solution of the corresponding imine 1, 2 or 3 (10 mmol) in dry acetonitrile (50 mL). After stirring for 12 h at rt, the solvent was gently evaporated under reduced pressure, the residue was quenched with saturated aqueous NaHCO3 (50 mL) and extracted with ether (3.x.10 mL). The combined extract was dried over Na2SO4, the solvent was evaporated at reduced pressure and the residue was purified by column chromatography on silica gel eluting with a 20/1 mixture of hexane/ethyl acetate. This afforded the tagged amine. In the case of volatile amines 4a, 4d, 5a, 6a, 8a, and 8b the combined extract was mixed with hydrochloric acid (1.5 mL), evaporated to dryness, and the residue was washed with pentane. In this way the amines 4a, 4d, 5a, 6a were isolated as hydrochloride. For comparison to the reported data, the hydrochloride of 2-Tfm-pyrrolidine 8a and 2-Tfm-piperidine 8b were again treated with aqueous NaHCO3 and were analyzed as free bases.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 872-32-2

Reference£º
Article; Shevchenko, Nikolay E.; Vlasov, Katja; Nenajdenko, Valentine G.; Ro?schenthaler, Gerd-Volker; Tetrahedron; vol. 67; 1; (2011); p. 69 – 74;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.134272-64-3, name is N-(2-Aminoethyl)maleimide Hydrochloride. An updated downstream synthesis route of 134272-64-3 as follows., 134272-64-3

(DM 1 -GMB- Ala-Gly-Gly)2-Lys-b-Ala-OH (5.3 mg, 0.0022 mmol) was dissolved in anhydrous dimethylformamide (0.25 mL) to which was added EDC (2.0 mg, 0.014 mmol). After 2 min 2-amino-ethyl-maleimide HC1 salt (1 mg, 0.0057 mmol) was added and the solution was stirred at room temperature for 15 min. The reaction mixture was purified by HPLC on a XB-C18 21.2×150 mm, 5muiotaeta column with a flow rate of 21.2mL/min. eluting with deionized water containing 0.1% formic acid using a gradient of acetonitrile 5% for 4 min then a linear gradient of 5% – 95% over 17 min. Fractions containing desired product were combined, frozen and lyophilized to give 2 mg (35 % yield) of white solid. MS [M + Na]+ calcd. 2537.0; found 2537.3.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of N-(2-Aminoethyl)maleimide Hydrochloride, you can also browse my other articles.

Reference£º
Patent; IMMUNOGEN, INC.; WIDDISON, Wayne, C.; CHARI, Ravi, V.J.; WO2014/194030; (2014); A2;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

25021-08-3, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.25021-08-3, name is 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid. A new synthetic method of this compound is introduced below.

1-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)-2-oxo-6,9,12,15,18,21,24,27-octaoxa-3-azatriacontan-30-oic acid Tert-Butyl 1-amino-3,6,9,12,15,18,21,24-octaoxaheptacosan-27-oate (100 mg, 201 mumol) was initially charged in 1.0 ml of DMF and (2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid (46.8 mg, 301 mumol), 1-hydroxy-1H-benzotriazole hydrate (76.9 mg, 502 mumol) and 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (77.0 mg, 402 mumol) were added. The reaction mixture was stirred overnight at RT and then ethyl acetate was added. The organic phase was washed twice with 5% citric acid solution, with sat. sodium hydrogen carbonate solution and then with sat. sodium chloride solution. The organic phase was dried over magnesium sulfate. The solvents were evaporated under vacuum and the residue purified by prep. RP-HPLC (column: Reprosil 125*30; 10mu, flow: 50 mL/min, MeCN/water/0.1% TFA). The solvents were evaporated under vacuum and the residue dried under high vacuum. This gave 19.1 mg (13% of theory) of the compound tert-Butyl 1-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)-2-oxo-6,9,12,15,18,21,24,27-octaoxa-3-azatriacontan-30-oate. LC-MS (Method 1): Rt=0.87 min; MS (ESIpos): m/z=635 [M+H]+, 25021-08-3

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; LERCHEN, Hans-Georg; REBSTOCK, Anne-Sophie; CANCHO GRANDE, Yolanda; WITTROCK, Sven; BERNDT, Sandra; GRITZAN, Uwe; FITTING, Jenny; STELTE-LUDWIG, Beatrix; JONES, Patrick; MAHLERT, Christoph; VOTSMEIER, Christian; SCHOeNFELD, Dorian; TRAUTWEIN, Mark; WEBER, Ernst; PAWLOWSKI, Nikolaus; GREVEN, Simone; GLUeCK, Julian Marius; HAMMER, Stefanie; DIETZ, Lisa; MAeRSCH, Stephan; (357 pag.)US2020/138970; (2020); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. A new synthetic method of this compound is introduced below., 1122-10-7

General procedure: To a stirred solution of 2,3-dibromomaleimide23 (1.0 mmol) in CH2Cl2 (20ml) Et3N (2.0mmol) and thiol (2.1mmol) were added under argon atmosphere and stirred for 3 h at room temperature. The reaction mixture was evaporated,and the crude product was purified by flash chromatography to give the desired compound.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1122-10-7, you can also browse my other articles.

Reference£º
Article; Csavas, Magdolna; Miskovics, Adrienn; Szcs, Zsolt; Rth, Erzsebet; Nagy, Zsolt L; Bereczki, Ilona; Herczeg, Mihaly; Batta, Gyula; Nemes-Nikodem, Eva; Ostorhazi, Eszter; Rozgonyi, Ferenc; Borbas, Aniko; Herczegh, Pal; Journal of Antibiotics; vol. 68; 9; (2015); p. 579 – 585;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

69778-83-2, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.69778-83-2, name is 4-Methoxy-1H-pyrrol-2(5H)-one. A new synthetic method of this compound is introduced below.

To a solution of phosphoryl bromide (220 molpercent, 5.58 g) in dry dichloromethane (20 mL) was added DMF (220 molpercent, 1.4 mL) dropwise over 2 minutes. The resulting reaction mixture was stirred at room temperature for 30 min and concentrated in vacuo to provide the Vilsmeyer complex as a white solid. After drying in vacuo for Ih, the white solid was suspended in dry dichloromethane (20 mL) and cooled to 0 0C. A solution of 4-methoxy-3- pyrrolin-2-one (A) (Ig, 8.84 mmol) in dichloromethane (10 mL) was added dropwise and the102USlDOCS 550694W1 EPO resulting reaction mixture was stirred at 0 0C for 30 min, then at room temperature for 20 h. The mixture was poured onto ice (75 mL), treated with aqueous NaOH 4N (50 mL), diluted with EtOAc (100 mL), and stirred for 15 min. The layers were separated, and the aqueous layer was extracted with EtOAc (3 x 60 mL). The combined organic layers were washed with brine (3 x 200 mL,), dried over Na2SO4, filtered and concentrated in vacuo to afford a crude residue that was purified using flash column chromatography over silica gel with a gradient elution of 0-20percent EtOAC/Hexanes to provide Compound B as a white solid. NMR 1H (300 MHz, CDCl3): delta (ppm) 3.95 (s, 3H); 5.90 (s, IH); 9.30 (s, IH), 9.92-10.34 (bs, IH). m/z: 205.1 [M+ 1]

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 69778-83-2

Reference£º
Patent; GEMIN X BIOTECHNOLOGIES INC.; WO2006/89397; (2006); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

25021-08-3, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.25021-08-3, name is 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid, below Introduce a new synthetic route.

250 mg (1.07 mmol) of tert-Butyl 3-[2-(2-aminoethoxy)ethoxy]propanoate, 151 mg (0.974 mmol) of 2-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid, 224 mg (1.46 mmol) of 1-hydroxy-1H-benzotriazole hydrate and 224 mg (1.17 mmol) of 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride were dissolved in 5.0 ml of dimethylformamide. The reaction mixture was stirred at RT for 1 h. Ethyl acetate was added and the mixture was extracted twice with 5% strength citric acid solution and with saturated sodium bicarbonate solution. The organic phase was washed twice with saturated sodium chloride solution and dried over magnesium sulphate, and the solvent was evaporated under reduced pressure. The residue was purified by preparative RP-HPLC (column: Reprosil 250*40; 10mu, flow rate: 50 ml/min, MeCN/water/0.1% TFA). The solvents were evaporated under reduced pressure and the residue was dried under high vacuum. This gave 267 mg (64% of theory) of tert-Butyl 3-[2-(2-{[(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetyl]amino}ethoxy)ethoxy]propanoate. LC-MS (Method 1): Rt=0.73 min; MS (ESIpos): m/z=371 (M+H)+.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 25021-08-3, you can also browse my other articles.

Reference£º
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; LERCHEN, Hans-Georg; REBSTOCK, Anne-Sophie; CANCHO GRANDE, Yolanda; WITTROCK, Sven; BERNDT, Sandra; GRITZAN, Uwe; FITTING, Jenny; STELTE-LUDWIG, Beatrix; JONES, Patrick; MAHLERT, Christoph; VOTSMEIER, Christian; SCHOeNFELD, Dorian; TRAUTWEIN, Mark; WEBER, Ernst; PAWLOWSKI, Nikolaus; GREVEN, Simone; GLUeCK, Julian Marius; HAMMER, Stefanie; DIETZ, Lisa; MAeRSCH, Stephan; (357 pag.)US2020/138970; (2020); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.73286-71-2, name is N-Boc-2-pyrroline. Here is a downstream synthesis route of the compound 73286-71-2. 73286-71-2

Reference Example 1; tert-Butyl (3aR*,9bR*)-2,3,3a,4,5,5a,9a,9b-octahydro-lH- pyrrolo[3,2-c]quinoline-1-carboxylate; Sodium (1.2 g, 50 mmol) was dissolved in methanol (15 ml), aniline (0.9 g, 10 mmol) was added at room temperature, and the mixture was stirred for 10 min. This mixture was added to a suspension of paraformaldehyde (0.42 g, 14 mmol) in methanol (10 ml), and the mixture was stirred at room temperature for 5 hrs. The reaction mixture was poured into ice water, and the mixture was extracted with diethyl ether. The extract was dried (over anhydrous MgS04), and the solvent was evaporated under reduced pressure. The residue was dissolved in methanol (20 ml), tert-butyl 2,3-dihydro- 1H-pyrrole-1-carboxylate (850 mg, 5 mmol) was added and the mixture was heated under reflux for 18 hrs. The residue was subjected to column chromatography using silica gel (30 g) and eluted with hexane-ethyl acetate (9: 1-4:1, v/v) to give the title compound (180 mg, 12%) as an amorphous form. ?H-NMR (CDC13) 8: 1 . 48 (9H, d, J=6.1 Hz) , 1 . 76-2 . 01 (2H, m), 2.23-2.45 (lH, m), 3.13-3.57 (5H, m), 5.09 (lH, dd, J=47.2,4.0 Hz), 6.54-6.85 (2H, m), 7.10-7.23 (2H, m). LC/MS (ESI) m/z: 275 (MH+).

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 73286-71-2

Reference£º
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; WO2005/105802; (2005); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

73286-71-2, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.73286-71-2, name is N-Boc-2-pyrroline, below Introduce a new synthetic route.

To N-Boc pyrroline (480 mg; 2.83 mmol) and chloro oxime 2a (557 mg; 2.93 mmol) in ethyl acetate (15 mL), was added dropwise triethylamine (0.4 mL) in ethyl acetate (15 mL). The reaction mixture was stirred at room temperature for 24 hours. An additional portion of chloro oxime 2a (234 mg; 1.23 mmol) and triethylamine were added. After stirring overnight, the reaction mixture was poured into water (50 mL) and extracted. The organic layer was dried (MgSO4), filtered and evaporated. Chromatography with 30% ethyl acetate/hexanes yielded 3a as a white solid.MS 345 (M+Na).

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of N-Boc-2-pyrroline. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Macielag, Mark J.; Weidner-Wells, Michele A.; Lin, Shu-Chen; US2009/29980; (2009); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.55750-48-6, name is Methyl 2,5-dioxo-2,5-dihydro-1H-pyrrole-1-carboxylate. An updated downstream synthesis route of 55750-48-6 as follows., 55750-48-6

[ 4313] 30 mg (30 f.tmol) oflntermediate 89 were taken up in2 ml of 1 ,4-dioxane and admixed with 4 ml of saturatedsodium hydrogencarbonate solution and then with 7.5 mg (50f.tmol) of methyl 2,5-dioxo-2,5-dihydro-18-pyrrole-1-carboxylate.The reaction mixture was stirred at RT for 1 handthen concentrated in vacuo. The remaining residue was purifiedby means of preparative HPLC. After lyophilization, 24mg (74% of theory) of the title compound were obtained.[4314] HPLC (Method 5): R,=2.2 min;[4315] LC-MS (Method 1): R,=l.Ol min; MS (ESipos):rnlz=1006 (M+Hr.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of Methyl 2,5-dioxo-2,5-dihydro-1H-pyrrole-1-carboxylate, you can also browse my other articles.

Reference£º
Patent; SEATTLE GENETICS, INC.; LERCHEN, Hans-Georg; LINDEN, Lars; SHEIKH, Sherif El; WILLUDA, Joerg; KOPITZ, Charlotte C.; SCHUHMACHER, Joachim; GREVEN, Simone; MAHLERT, Christoph; STELTE-LUDWIG, Beatrix; GOLFIER, Sven; BEIER, Rudolf; HEISLER, Iring; HARRENGA, Axel; THIERAUCH, Karl-Heinz; BRUDER, Sandra; PETRUL, Heike; JOeRISSEN, Hannah; BORKOWSKI, Sandra; US2015/246136; (2015); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

2973-17-3, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.2973-17-3, name is 1-Allyl-1H-pyrrole-2,5-dione. An updated downstream synthesis route of 2973-17-3 as follows.

Synthesis Example f-III-6 Synthesis of Silicone Compound: 1 = n = 0, m =1 in the Chemical Structure 6 Drip 3.08 parts of the compound f-II: N-aryl maleimide, 10 parts of toluene, and 0.043 parts of xylene solution of 2 % by weight platinum / 1,3-divinyl-1,1,3,3-tetramethyl disiloxane complex (manufactured by Sigma-Aldrich Co.) to a solution of 5.0 parts of silicone compound: (1,1,1,3,5,5,5-heptamethyl trisiloxane (manufactured by Sigma-Aldrich Co) and 5.0 parts of toluene in about 60 minutes while stirring at a room temperature followed by reaction under the same condition one night. Thereafter, distill away the solvent with a reduced pressure, conduct stripping treatment for two hours with a reduced pressure of 10 mmHg at 40 C and confirm disappearance of absorption (2155 cm-1 of Si-H in infra-red absorption spectrum to obtain 5.01 parts of the target silicone compound f-M6. The infra-red absorption spectrum graph is shown as Fig. 8F., 2973-17-3

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 1-Allyl-1H-pyrrole-2,5-dione. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Ricoh Company, Ltd.; EP2520579; (2012); A2;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem