Category: pyrrolines

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.25021-08-3,2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid,as a common compound, the synthetic route is as follows.

Complex (OC-6-44)-acetatodiamminedichloridohydroxidoplatinum(IV), 3, (56?mg, 0.15?mmol) suspended in 1?mL of DMF was added to a solution of activated ligand HL (0.74?mmol) in 1?mL of DMF (see above). The mixture reacted for 24?h at room temperature. Then, the precipitate was discarded by centrifugation and the solvent removed by means of a rotary evaporator. The residue was dissolved in 200?muL of methanol and precipitated by adding 25?mL of diethyl ether. The crystalline solid is washed with diethyl ether. Yield: 43?mg (56%). 1H NMR (DMSO-d6) delta: 1.91 (s, 3H, CH3), 4.17 (s, 2H, CH2), 6.49 (m, 6H, NH3), 7.09 (s, 2H, CH) ppm; 13C NMR (DMSO-d6) delta: 22.5 (CH3), 47.5 (CH2), 134.8 (CH), 170.4 (NC(O)), 174.4 (OC(O)CH2), 178.0 (OC(O)CH3) ppm; 195Pt NMR (DMSO-d6) delta: 1230?ppm. ESI-MS (positive ion mode): 514?m/z [M?+?H]+, calcd for C8H14Cl2N3O6Pt [M?+?H]+ 514?m/z. Elem. Anal. found: C 18.96; H 2.78; N 7.93%; calcd. for C8H13Cl2N3O6Pt: C 18.72; H 2.55; N 8.19%.

As the paragraph descriping shows that 25021-08-3 is playing an increasingly important role.

Reference£º
Article; Gabano, Elisabetta; Perin, Elena; Bonzani, Diego; Ravera, Mauro; Inorganica Chimica Acta; vol. 488; (2019); p. 195 – 200;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

134272-64-3, N-(2-Aminoethyl)maleimide Hydrochloride is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

NHS ester, compound 5a (8.2 mg, 7.6 muiotaetaomicron) and l-(2-aminoethyl)-lH-pyrrole-2,5- dione hydrochloride (2.2 mg, 0.011 mmol) were dissolved in anhydrous dichloromethane (305 mu) at room temperature. DIPEA (2.66 mu, 0.015mmol) was added and the reaction and was stirred for 3.5 hours. The reaction mixture was concentrated and was purified by RPHPLC (CI 8 column, CH3CN/H20, gradient, 35% to 55%). The desired product fractions were frozen and lyophilized to give maleimide, compound D5 as a solid white powder (5.3 mg, 58% yield). LCMS = 5.11 min (8 min method). MS (m z): 1100.6 (M + 1)+.

134272-64-3 N-(2-Aminoethyl)maleimide Hydrochloride 22118207, apyrrolines compound, is more and more widely used in various.

Reference£º
Patent; IMMUNOGEN, INC.; CHITTENDEN, Thomas; DECKERT, Jutta; HICKS, Stuart, William; LAI, Katharine, C.; PARK, Peter, U.; RUI, Lingyun; TAVARES, Daniel, J.; KOHLI, Neeraj; (274 pag.)WO2018/129029; (2018); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.766-36-9,3-Ethyl-4-methyl-2,5-dihydro-1H-pyrrol-2-one,as a common compound, the synthetic route is as follows.

EXAMPLE 7 trans-6-Cyano-3,4-dihydro-2,2-dimethyl-4-(3-ethyl-4-methyl-2-oxo-3-pyrrolin-1-yl) -2H-benzo[b]pyran-3-ol 2.4 g (0.08 mol) of 80percent NaH are introduced into a solution of 14.4 g (0.072 mol) of trans-3-bromo-6-cyano-3,4-dihydro-2,2-dimethyl-2H-benzo[b]pyran -4-ol in 200 ml of DMSO. The mixture is stirred for one hour at 20¡ã C., and 3.6 g (0.12 mol) of 80percent NaH and 15 g (0.12 mol) of 3-ethyl-4-methyl-2-oxo-3-pyrroline are introduced. The reaction mixture is stirred at 40¡ã C. for three hours and then introduced into ice water, and the product is filtered off with suction, dried and chromatographed on a silica gel column using methylene chloride/methanol (95: 5). The product obtained in this way crystallizes from a little ethanol. Crystals of melting point 207¡ã-208¡ã C. C19 H22 N2 O4 (326,41) calc. C 69.92;H 6.80;N 8.58; found C 70.0;H 6.7;N 8.6;

As the paragraph descriping shows that 766-36-9 is playing an increasingly important role.

Reference£º
Patent; Hoechst Aktiengesellschaft; US5043344; (1991); A;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.25021-08-3,2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid,as a common compound, the synthetic route is as follows.

General procedure: A mixture of compound [3-7]a-i (0.01mole) and thionyl chloride (0.01mole) placed in dry benzene (10 ml.) and refluxed for 7 hours. The excess of thionyl chloride and benzene were removed under vacuum after cooling .

25021-08-3 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid 319935, apyrrolines compound, is more and more widely used in various.

Reference£º
Article; Samir, Ali H.; Saeed, Ruwaidah S.; Matty, Fadhel S.; Oriental Journal of Chemistry; vol. 34; 1; (2018); p. 286 – 294;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.134272-64-3,N-(2-Aminoethyl)maleimide Hydrochloride,as a common compound, the synthetic route is as follows.

Step 2: To a solution of the NHS ester, compound 6a (12.3 mg, 0.011 mmol) and N-(2-aminoethyl)maleimide hydrochloride (2.0 mg, 0.011 mmol) in anhydrous dichloromethane (0.3 mL) was added DIPEA (0.0022 mL, 0.013 mmol). The mixture was stirred at room temperature for 3 hours then it was stripped under reduced pressure. The residue was purified by semi-preparative reverse phase HPLC (CI 8 column, CH3CN/H2O). The fractions that contained pure product were combined, frozen and lyophilized to give the desired maleimide, compound D6 (10 mg, 80% yield). LCMS = 8.3 min (15 min method). MS (m/z): 1181.8 (M + 1)+.

As the paragraph descriping shows that 134272-64-3 is playing an increasingly important role.

Reference£º
Patent; IMMUNOGEN, INC.; CHITTENDEN, Thomas; DECKERT, Jutta; HICKS, Stuart, William; LAI, Katharine, C.; PARK, Peter, U.; RUI, Lingyun; TAVARES, Daniel, J.; KOHLI, Neeraj; (274 pag.)WO2018/129029; (2018); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

25021-08-3, 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The carboxylic acid of ligand HL was activated according to a published procedure [16] . Briefly, a solution of HL (48?mg, 0.309?mmol) and DCC (64?mg, 0.309?mmol), dissolved in 1?mL of anhydrous DMF, was sonicated in an ultrasonic bath for 15?min at room temperature. The colorless solution became dark red and a white solid (dicyclohexylurea, DCU) precipitated. Then the precipitate was separated by centrifugation and the supernatant was added very slowly (dropwise for 30?min) to a suspension of (OC-6-44)-diamminedichloridohydroxido(2-hydroxyethanolato)platinum(IV), 2, (100?mg, 0.276?mmol) in 5?mL of anhydrous DMF. The reaction was carried out overnight at room temperature. The mixture was then cooled to -20?C for about 30?min and the precipitate was eliminated by filtration (PTFE filter with a porosity 0.45?mum). The solvent was evaporated by a rotary evaporator and the yellow oil obtained was dissolved in ultrapure water, in order to allow the precipitation of the remained DCU. The yellow solution was filtered (0.45?mum porosity), the water was removed under reduced pressure and the reaction product was precipitated with acetone/diethyl ether and then dried in vacuo. Yield: 83?mg (60%). 1H NMR (D2O) delta: 1.19 (t, 3H, -OCH2CH3, 3J?=?6.95?Hz), 3.43 (q, 2H, -OCH2CH3, 3J?=?6.95?Hz), 4.39 (s, 2H, -OCOCH2), 6.97 (s, 2H, -NCOCH=CH) ppm; 13C NMR (D2O) delta: 16.1 (-OCH2CH3), 40.0 (-OCOCH2), 67.7 (-OCH2CH3), 134.7 (-NCOCH=CH), 172.4 (-NCOCH=CH), 176.3 (-OCOCH2) ppm; 195Pt NMR (D2O) delta: 904?ppm (multiplet of five lines, 1JPt-N?=?197.4?Hz). ESI-MS (positive ion mode): 500?m/z [M?+?H]+, calcd for C8H16Cl2N3O5Pt [M?+?H]+ 500?m/z. Elem. Anal. found: C 19.58; H 3.24; N 8.13%.; calcd. for C8H15Cl2N3O5Pt: C 19.25; H 3.03; N 8.42%.

25021-08-3 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid 319935, apyrrolines compound, is more and more widely used in various.

Reference£º
Article; Gabano, Elisabetta; Perin, Elena; Bonzani, Diego; Ravera, Mauro; Inorganica Chimica Acta; vol. 488; (2019); p. 195 – 200;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.151038-94-7,6-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)hexanehydrazide 2,2,2-trifluoroacetate,as a common compound, the synthetic route is as follows.

Acetoxycisplatin(4-acetylphenyl)carboxylate (178 mg, 0.341 mmol, 1 equiv.) was dissolved in DMF (0.05 M, 6.8 mL) and treated with 6-(2,5-dioxo-2,5-dihydro-lH- pyrrol-l-yl)hexanehydrazide TFA salt (139 mg, 0.409 mmol, 1.2 equiv.). The reaction mixture was stirred at room temperature for 5 hours. MTBE was added to the reaction mixture until a suspension was obtained and a yellow solid was filtered to afford compound 17 (159 mg, 64%, 97% pure). NMR (500 MHz, DMF-d7) delta 10.48 (s, 0.3H), 10.40 (s, 0.6H), 7.97-7.92 (m, 2H), 7.91-7.86 (m, 2H), 7.24-6.77 (m, 6H), 7.02 (s, 2H), 3.50-3.44 (m, 2H), 2.77-2.72 (m, 1.4H), 2.44-2.38 (m, 0.6H), 2.40 (s, 2H), 2.37 (s, 1H), 1.94 (s, 3H), 1.73-1.64 (m,2H), 1.63-1.54 (m, 2H), 1.42-1.29 (m, 2H); HPLC-MS 98%, m/z for C2iH29Cl2N507Pt [(M+H)+] = 730.2.

As the paragraph descriping shows that 151038-94-7 is playing an increasingly important role.

Reference£º
Patent; PLACON THERAPEUTICS, INC.; KADIYALA, Sudhakar; MOREAU, Benoit; BILODEAU, Mark T.; WHALEN, Kerry; SINGH, Sukhjeet; WOOSTER, Richard; LEMELIN, Charles-Andre; (151 pag.)WO2016/209935; (2016); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.69778-83-2,4-Methoxy-1H-pyrrol-2(5H)-one,as a common compound, the synthetic route is as follows.

EXAMPLE 1 (Z)-4-methoxy-5-isobutylidene-3-pyrrolin-2-one (IV, R2 =H, R3 =Me, R4 =isopropyl) 35.9 g of 4-methoxy-3-pyrrolin-2-one (II, R3 =Me) was dissolved in 2000 ml of 4 n aqueous sodium hydroxide solution and was mixed at 50 C. within 30 minutes with a solution of 24.0 g of isobutyraldehyde in 675 ml of methanol. After 1 hour, 675 ml of water was added and the reaction mixture was cooled to 0 C. The resulting product was filtered off, washed with water and dried in a vacuum at 40 C. The filtrate was extracted with dichloromethane. The yield was 39.7 g plus 10.1 g from the dichloromethane extract (99.4 percent total yield). Other data for the product was: Melting point: 139 to 141 C., colorless crystals 1 H-NMR: delta=8.64 (br.s, 1H), 5.30 (d, 1H), 5.14 (d, 1H), 3.85 (s, 3H), 2.67 (m, 1H), 1.11 (d, 6H)

The synthetic route of 69778-83-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Lonza, Ltd.; US4983743; (1991); A;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

69778-83-2, 4-Methoxy-1H-pyrrol-2(5H)-one is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of phosphoryl bromide (220 molpercent, 5.58 g) in dry dichloromethane (20 mL) was added DMF (220 molpercent, 1.4 mL) dropwise over 2 minutes. The resulting reaction mixture was stirred at room temperature for 30 min and concentrated in vacuo to provide the Vilsmeyer complex as a white solid. After drying IN-VACUO for lh, the white solid was suspended in dry dichloromethane (20 mL) and cooled to 0 ¡ãC. A solution of 4-methoxy-3- pyrrolin-2-one (A) (LG, 8.84 mmol) in dichloromethane (10 mL) was added dropwise and the resulting reaction mixture was stirred at 0 ¡ãC for 30 min, then at room temperature for 20 h. The mixture was poured onto ice (75 mL), treated with aqueous NAOH 4N (50 mL), diluted with EtOAc (100 mL), and stirred for 15 min. The layers were separated, and the aqueous layer was extracted with EtOAc (3 x 60 mL). The combined organic layers were washed with brine (3 x 200 mL), dried over NA2SO4, filtered and concentrated in vacuo to afford a crude residue that was purified using flash column chromatography over silica gel with a gradient elution of 0-20percent EtOAC/Hexanes to provide Compound B as a white solid. NMR 1H (300 MHz, CDC13) : 6 (ppm) 3.95 (s, 3H) ; 5.90 (s, 1H) ; 9.30 (s, 1H), 9. 92-10.34 (bs, 1H). m/z : 205.1 [M+1]

The synthetic route of 69778-83-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; GEMIN X BIOTECHNOLOGIES INC.; WO2004/106328; (2004); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

134272-64-3, N-(2-Aminoethyl)maleimide Hydrochloride is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(0435) To a solution of the NHS ester, 2b (12.3 mg, 0.011 mmol) and N-(2-aminoethyl)maleimide hydrochloride (2.0 mg, 0.011 mmol) in anhydrous dichloromethane (0.3 mL) was added DIPEA (0.0022 mL, 0.013 mmol). The mixture was stirred at room temperature for 3 hours then it was stripped under reduced pressure. The residue was purified by semi-preparative reverse phase HPLC (C18 column, CH3CN/H2O). The fractions that contained pure product were combined, frozen and lyophilized to give the desired maleimide, compound D2 (10 mg, 80% yield). LCMS=8.3 min (15 min method). MS (m/z): 1181.8 (M+1)+.

The synthetic route of 134272-64-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; IMMUNOGEN, INC.; Hilderbrand, Scott A.; Hutchins, Benjamin M.; (94 pag.)US2018/208562; (2018); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem