Heterocyclic Building Blocks-Pyrrolines

73286-71-2,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.73286-71-2,N-Boc-2-pyrroline,as a common compound, the synthetic route is as follows.

The title compound was prepared using commercially available ethyl chloro oximidoacetate (5). N-Boc-pyrroline (1.0 g; 5.91 mmol), ethyl chloro oximidoacetate (2.55 g; 16.8 mmol) and sodium bicarbonate (1.77 g; 21.06 mmol) in ethyl acetate (15 mL) were stirred for 54 hours. An additional amount of chloro oxime (2.6 g; 17.28 mmol) and sodium bicarbonate (2.1 g; 25.00 mmol) was added and the reaction mixture stirred overnight. The addition of reagents was repeated again and the reaction mixture stirred for 36 hours. The reaction mixture was diluted with ethyl acetate and washed with water. The organic layer was washed with water, brine, dried (MgSO4), filtered and evaporated. Cycloadduct 6 was isolated as a clear oil after chromatography with 20% ethyl acetate/hexanes.MS 307 (M+Na).

As the paragraph descriping shows that 73286-71-2 is playing an increasingly important role.

Reference£º
Patent; Macielag, Mark J.; Weidner-Wells, Michele A.; Lin, Shu-Chen; US2009/29980; (2009); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1334177-86-4,1-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)-3-oxo-7,10,13,16,19,22,25,28-octaoxa-4-azahentriacontan-31-oic acid,as a common compound, the synthetic route is as follows.,1334177-86-4

Chloroform (1 0.00 ml) and methanol (0.4 ml) were added to crude 17 (307 mg, 0.254 30 mmol) followed by mal-amido-peg8-acid (339 mg, 0.561 mmol, 2.2 eq) and EDCI (1 07 mg, 0.558 mmol, 2.19 eq). The reaction was allowed to proceed at room temperature for 45 min when completion was observed by LCMS. Ammonium chloride in water (30 ml, 6 mass%) was added and the mixture was stirred vigorously. The mixture was decanted in a biotage phase separation cartridge. The DCM layer was evaporated to dryness under vacuum. 35 The volatiles were removed by rotoevaporation and the crude residue was purified by chromatography (50g Ultra, Biotage, gradient 30/70 to 100/0 of 16% MeOH in DCM I DCMin 1 OCV; Elution at more than 10% of MeOH). All fractions were analysed by TLC (1 0% MeOH in DCM). The pure fractions were pooled. The solvent was removed by evaporation to give 18 (200 mg). LCMS analysis showed traces of mal-pegS-acid, and the material was purified further by preparative HPLC, freeze-dried, aliquoted in dichloromethane, and dried 5 under high vacuum to give 18 as a white solid. The purity was 99.45%. (B, 110 mg, 0.0467 mmol, 18.3% Yield). Analytical Data: LC/MS, 15 min method, RT 5.90 min; MS (ES+) m/z (relative intensity) 1179.5 ([M + 2Hf+¡¤, 100); 1H NMR (400 MHz, DMSO-d6) o 9.92 (s, 2H), 8.16 (d, J = 6.9 Hz, 2H), 7.99 (t, J = 5.7 Hz, 2H), 7.86 (d, J = 8.7 Hz, 2H), 7.55 (s, 4H), 7.18 (s, 4H), 7.07 (s, 2H), 7.00 (s, 4H), 6.79 (s, 2H), 6.50 (s, 2H), 5.48 (s, 2H), 5.23- 4.77 (m, 10 4H), 4.39 (t, J = 7.0 Hz, 2H), 4.22 (dd, J = 8.7, 6.6 Hz, 2H), 4.10 (s, 4H), 3.77 (s, 6H), 3.64 – 3.55 (m, 8H), 3.55- 3.42 (m, 56H), 3.37 (t, J = 5.9 Hz, 6H), 3.28 (t, J = 8.3 Hz, 2H), 3.15 (q, J = 5.8 Hz, 4H), 2.49-2.37 (m, 4H), 2.37-2.30 (m, 4H), 2.17 (s, 2H), 2.09- 1.73 (m, 1 OH), 1.30 (d, J = 7.0 Hz, 6H), 0.85 (dd, J = 15.3, 6.7 Hz, 12H). 15

1334177-86-4 1-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)-3-oxo-7,10,13,16,19,22,25,28-octaoxa-4-azahentriacontan-31-oic acid 51340955, apyrrolines compound, is more and more widely used in various fields.

Reference£º
Patent; MEDIMMUNE LIMITED; DIMASI, Nazzareno; HOWARD, Philip Wilson; MASTERSON, Luke; TIBERGHIEN, Arnaud Charles; VIJAYAKRISHNAN, Balakumar; WHITE, Jason; (135 pag.)WO2019/34764; (2019); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.17057-04-4,4-(2,5-Dioxo-2,5-dihydro-pyrrol-1-yl)-benzoicacid,as a common compound, the synthetic route is as follows.

General procedure: Equimolar quantities of maleimide (2) and nitrones (5a-k and 6a-k) were refluxed in toluene (20 ml) and ethyl alcohol (5 ml) for 8-10 h (TLC monitoring using petroleum ether and hexane 1:1) followed by cooling with addition of dry ether. The products (7a-k and 8a-k) were separated out after filtration and recrystallized from toluene and petroleum ether mixture (1:1) to yield cis-isomers (7aa-7ka and 8aa-8ka). The mother liquor on further work up provided trans-isomers which were recrystallized from ethanol and diethyl ether mixture (1:1) (7aa’-7ka’ and 8aa’-8ka’) (Fig. 3).7 These stereoisomers were characterized by their 1H NMR, IR and mass spectra in addition to their melting points and elementary analysis. These stereoisomers have identical IR spectra and elemental analysis but differ in their melting points, 1H NMR and mass spectra., 17057-04-4

As the paragraph descriping shows that 17057-04-4 is playing an increasingly important role.

Reference£º
Article; Anand, Preet; Singh, Baldev; Bioorganic and Medicinal Chemistry; vol. 20; 1; (2012); p. 521 – 530;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

6913-92-4, 1-Benzyl-3-pyrroline is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

6913-92-4, Example 2Synthesis of 3-benzyl-6-oxa-3-aza-bicyclo[3.1.0]hexane (1-2) To an ice-cooled solution of 1 -benzyl pyrroline (0.01 mol), 98% H2SO4 (0.012 mol), water (1.5 g), and acetone (10 mL) in a round bottom flask was added 77% m-CPBA (0.013 mol) with stirring, and allowed to react for about 50 h at room temperature. After completion of the reaction (TLC monitor), acetone was evaporated under reduced pressure, and the mixture was neutralized by 1M NaOH, and extracted with toluene (30 mL ¡Á3). The precipitates that appeared were filtered, and the filtrate was repeatedly washed with water (30 mL ¡Á2). After the solvent was evaporated under reduced pressure, pure product was obtained in 77% yield via column chromatography (silica gel, CH2Cl2:EtOAc :MeOH, 7.5: 2.00: 0.5).

As the paragraph descriping shows that 6913-92-4 is playing an increasingly important role.

Reference£º
Patent; NORTHWESTERN UNIVERSITY; SILVERMAN, Richard, B.; JI, Haitao; LAWTON, Graham, R.; WO2008/42353; (2008); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

1122-10-7, 3,4-Dibromo-1H-pyrrole-2,5-dione is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Synthesis of analogue 2 was undertaken following the procedure of Baker et al.2 Purified amylin-(1-8) (9) (10.0 mg, 12.4 x 10-3 mmol) was dissolved in a deoxygenated mixture of acetonitrile (12.0 mL) and 250 mM potassium phosphate buffer (24.0 mL, pH 7) and was further deoxygenated for 30 min (argon). 2,3-Dibromomaleimide (3.46 mg, 13.59 x 10-3 mmol) was then added and the resulting yellow mixture was stirred at room temperature for 30 min under argon during which time all the starting material had disappeared as judged by analytical RP-HPLC (Figure S 5). Crude product 2 was lyophilised and purified by RP-HPLC on a preparative Waters XTerra Prep. C18 column at a flow rate of 10 mL/min, using a linear gradient of 1%B to 36%B over 23 min (ca. 1.5%B per minute). Fractions were lyophilised to give the title compound 2 as a white amorphous solid (1.7 mg, 15%)., 1122-10-7

The synthetic route of 1122-10-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Kowalczyk, Renata; Harris, Paul W.R.; Brimble, Margaret A.; Callon, Karen E.; Watson, Maureen; Cornish, Jillian; Bioorganic and Medicinal Chemistry; vol. 20; 8; (2012); p. 2661 – 2668;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

25021-08-3, 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

N-[(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetyl]-beta-alanine The title compound was prepared from commercially available (2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid by coupling with tert-Butyl beta-alaninate hydrochloride (1:1) in the presence of EDCI/HOBt and N,N-diisopropylethylamine and subsequent deprotection with trifluoroacetic acid. LC-MS (Method 1): Rt=0.32 min; MS (ESIpos): m/z=227 (M+H)+., 25021-08-3

25021-08-3 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid 319935, apyrrolines compound, is more and more widely used in various fields.

Reference£º
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; LERCHEN, Hans-Georg; REBSTOCK, Anne-Sophie; CANCHO GRANDE, Yolanda; WITTROCK, Sven; BERNDT, Sandra; GRITZAN, Uwe; FITTING, Jenny; STELTE-LUDWIG, Beatrix; JONES, Patrick; MAHLERT, Christoph; VOTSMEIER, Christian; SCHOeNFELD, Dorian; TRAUTWEIN, Mark; WEBER, Ernst; PAWLOWSKI, Nikolaus; GREVEN, Simone; GLUeCK, Julian Marius; HAMMER, Stefanie; DIETZ, Lisa; MAeRSCH, Stephan; (357 pag.)US2020/138970; (2020); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.6913-92-4,1-Benzyl-3-pyrroline,as a common compound, the synthetic route is as follows.

6913-92-4, Cycloaddition of the nitrone 7 on benzyl-3-pyrroline 2 in order to obtain the heterobicycle 8: The nitrone 7 (300 mg, 2.29 mmol) and benzyl-3-pyrroline 2 (0.8 ml, 4.20 mmol) are dissolved in toluene (3 ml) and stirred for 1 h at 80 C. with microwave irradiation. TLC (AcOEt/petroleum ether 1/3) shows total transformation of the nitrone. The solvent is then evaporated before purification of the cycloadduct 8 (390 ring, 58%) on a silica column (eluent: AcOEt/toluene 1/4) which removes the more polar compounds also formed. Aspect: colorless oil. Rf=0.4 (EtOAc/toluene 1/4). 1H NMR (500 MHz, CDCl3): delta 7.35-7.2 (m, 5H, H-Ar), 4.60 (dd, 1H, 3J=4.9 Hz, J=7.4 Hz, H-4), 4.20 (q, 2H, 3J=7.1 Hz, H-8, H-8?), 3.7 (d, 1H, 2J=13.2 Hz, H-11), 3.58 (d, 1H, 2J=13.2 Hz, H-11?), 3.24 (q, 1H, 3J=7.1 Hz, H-3), 3.16 (br s, 1H, H-6), 3.00 (d, 1H, 3J=11 Hz, H-5), 2.94 (d, 1H, 3J=9.8 Hz, H-2), 2.78 (s, 3H, NCH3), 2.28 (br s, 1H, H-2?), 2.19 (br s, 1H, H-5?), 1.27 (t, 3H, 3J=7.1 Hz, H-9) ppm. 13C NMR (126 MHz, CDCl3): delta 170.03 (C-7), 138.58, 128.73, 128.41, 127.17 (C-Ar), 81.03 (C-4), 75.48 (C-6), 61.26 (C-8), 59.08 (C-11), 58.77 (C-5), 56.79 (C-2), 52.54 (C-3), 43.85 (NCH3), 14.24 (C-9) ppm. HRMS ESI: m/z calcul. for C16H23N2O3 [M+H]+: 291.1703. found: 291.1702.

The synthetic route of 6913-92-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Praly, Jean-Pierre; Aouadi, Kaiss; Cecioni, Samy; Denoroy, Luc; Parrot, Sandrine; US2015/175537; (2015); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.69778-83-2,4-Methoxy-1H-pyrrol-2(5H)-one,as a common compound, the synthetic route is as follows.,69778-83-2

EXAMPLE 1 Compound (IV) To a solution of 2-formyl-5-undecylpyrrole (4 g; 16.03 mmols) and 4-methoxy-3-pyrrolin-2-one (3.63 g; 32.06 mmols) in DMSO (53 ml) 2N sodium hydroxyde (45 ml) is added under nitrogen atmosphere and the mixture is stirred at 60¡ã C. for 8 hours. After dilution with water (200 ml) the yellow suspension is extracted with dichloromethane (600 ml). The organic phase is shaken with water and brine, anhydrified over anhydrous sodium sulphate and evaporated to dryness. The crude material is taken up in hexane and filtered to give 4-methoxy-5-(5-undecyl-1H-pyrrol-2-yl-methylene)-1,5-dihydro-pyrrol-2-one (4.86 g; 14.11 mmols) as a yellow crystalline solid. Yield: 88percent. 1 NMR (400 mhz, CDCl3), ppm: 0.87 (3H, m), 1.2-1.5 (16H, m), 1.72 (2H, m), 2.73 (2H, m), 3.89 (3H, s), 5.08 (1H, d, J=1.7 Hz), 5.97 (1H, dd, J=2.4 and 3.2 Hz), 6.31 (1H, s), 6.36 (1H, t, J=3.2 Hz), 10.25 (1H, bs), 10.74 (1H, bs).

As the paragraph descriping shows that 69778-83-2 is playing an increasingly important role.

Reference£º
Patent; Pharmacia & Upjohn S.p.A.; US6071947; (2000); A;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.25021-08-3,2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid,as a common compound, the synthetic route is as follows.

1-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)-2-oxo-6,9,12,15,18,21,24,27-octaoxa-3-azatriacontan-30-oic acid Tert-Butyl 1-amino-3,6,9,12,15,18,21,24-octaoxaheptacosan-27-oate (100 mg, 201 mumol) was initially charged in 1.0 ml of DMF and (2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid (46.8 mg, 301 mumol), 1-hydroxy-1H-benzotriazole hydrate (76.9 mg, 502 mumol) and 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (77.0 mg, 402 mumol) were added. The reaction mixture was stirred overnight at RT and then ethyl acetate was added. The organic phase was washed twice with 5% citric acid solution, with sat. sodium hydrogen carbonate solution and then with sat. sodium chloride solution. The organic phase was dried over magnesium sulfate. The solvents were evaporated under vacuum and the residue purified by prep. RP-HPLC (column: Reprosil 125*30; 10mu, flow: 50 mL/min, MeCN/water/0.1% TFA). The solvents were evaporated under vacuum and the residue dried under high vacuum. This gave 19.1 mg (13% of theory) of the compound tert-Butyl 1-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)-2-oxo-6,9,12,15,18,21,24,27-octaoxa-3-azatriacontan-30-oate. LC-MS (Method 1): Rt=0.87 min; MS (ESIpos): m/z=635 [M+H]+, 25021-08-3

The synthetic route of 25021-08-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; LERCHEN, Hans-Georg; REBSTOCK, Anne-Sophie; CANCHO GRANDE, Yolanda; WITTROCK, Sven; BERNDT, Sandra; GRITZAN, Uwe; FITTING, Jenny; STELTE-LUDWIG, Beatrix; JONES, Patrick; MAHLERT, Christoph; VOTSMEIER, Christian; SCHOeNFELD, Dorian; TRAUTWEIN, Mark; WEBER, Ernst; PAWLOWSKI, Nikolaus; GREVEN, Simone; GLUeCK, Julian Marius; HAMMER, Stefanie; DIETZ, Lisa; MAeRSCH, Stephan; (357 pag.)US2020/138970; (2020); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.25021-08-3,2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid,as a common compound, the synthetic route is as follows.

200 mg (0.594 mmol) of tert-butyl (14-amino-3,6,9,12-tetraoxatetradec-1-yl)carbamate, 111 mg (0.713 mmol) of (2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid and 410 mul (2.4 mmol) of N,N-diisopropylethylamine were dissolved in 6 ml of dimethylformamide, and 339 mg (0.892 mmol) of HATU were added. The reaction mixture was stirred at RT for 1 h and purified directly by preparative RP-HPLC (column: Reprosil 250¡Á30; 10mu, flow rate: 50 ml/min, MeCN/water, 0.1% TFA). The solvents were evaporated under reduced pressure and the residue was dried under high vacuum. This gave 130 mg (43% of theory) of tert-butyl [17-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)-16-oxo-3,6,9,12-tetraoxa-15-azaheptadec-1-yl]carbamate. LC-MS (Method 1): Rt=0.71 min; MS (ESIpos): m/z=474 (M+H)+.

25021-08-3, 25021-08-3 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid 319935, apyrrolines compound, is more and more widely used in various fields.

Reference£º
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; LERCHEN, Hans-Georg; REBSTOCK, Anne-Sophie; MARX, Leo; JOHANNES, Sarah Anna Liesa; STELTE-LUDWIG, Beatrix; DIETZ, Lisa; TERJUNG, Carsten; MAHLERT, Christoph; GREVEN, Simone; SOMMER, Anette; BERNDT, Sandra; (481 pag.)US2019/77752; (2019); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem