Heterocyclic Building Blocks-Pyrrolines

17057-04-4, 4-(2,5-Dioxo-2,5-dihydro-pyrrol-1-yl)-benzoicacid is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A mixture of 8.68 g (0.04 mol) of acid 1a, 9.52 g (0.08 mol) of thionyl chloride, 5 drops ofDMF, and 150 mL of benzene was heated for 2 h underreflux. The slightly turbid solution was filtered whilehot through a folded filter paper, and the light yellow filtrate was evaporated under reduced pressure (waterjetpump) on heating on a water bath. Yield 8.03 g(85%), 17057-04-4

17057-04-4 4-(2,5-Dioxo-2,5-dihydro-pyrrol-1-yl)-benzoicacid 86925, apyrrolines compound, is more and more widely used in various.

Reference£º
Article; Kolyamshin; Kuz’min; Ignat’ev; Rogozhina; Kol’tsov; Russian Journal of Organic Chemistry; vol. 51; 6; (2015); p. 901 – 902; Zh. Org. Khim.; vol. 51; 6; (2015); p. 917 – 918,2;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

1122-10-7, 3,4-Dibromo-1H-pyrrole-2,5-dione is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a stirred solution of 2,3-dibromomaleimide23 (1.0 mmol) in CH2Cl2 (20ml) Et3N (2.0mmol) and thiol (2.1mmol) were added under argon atmosphere and stirred for 3 h at room temperature. The reaction mixture was evaporated,and the crude product was purified by flash chromatography to give the desired compound., 1122-10-7

The synthetic route of 1122-10-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Csavas, Magdolna; Miskovics, Adrienn; Szcs, Zsolt; Rth, Erzsebet; Nagy, Zsolt L; Bereczki, Ilona; Herczeg, Mihaly; Batta, Gyula; Nemes-Nikodem, Eva; Ostorhazi, Eszter; Rozgonyi, Ferenc; Borbas, Aniko; Herczegh, Pal; Journal of Antibiotics; vol. 68; 9; (2015); p. 579 – 585;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1122-10-7,3,4-Dibromo-1H-pyrrole-2,5-dione,as a common compound, the synthetic route is as follows.

General procedure: To a solution of N-R-maleimide (10 mmol) in CCl4 (15 mL) was added dropwise a solution of Br2 (0.57 mL, 11 mmol) in CCl4 (10mL) at rt After the addition is completed, the reaction mixture was refluxed for 1 h and then cooled to room temperature. The solvent was evaporated in vacuo to give the crude trans-2,3-Dibromo-N-R-succinimide as pale-yellow solid. The crude succinimide was dissolved in THF (30 mL) and triethylamine (1.40 mL, 11 mmol) in THF (5 mL) was added dropwise at 0 oC.The resulting mixture was allowed to warm to room temperature and stirred for two h before concentrated in vacuo. The residue was dissolved in EtOAc and washed with H2O and brine. The organic layer was dried with anhydrous Na2SO4 and evaporated in vacuo to give bromo-N-R-maleimide (1)as pale-yellow solid with good yields., 1122-10-7

The synthetic route of 1122-10-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Li, Xiangmin; Li, Hongxian; Yang, Wei; Zhuang, Jinchen; Li, Hao; Wang, Wei; Tetrahedron Letters; vol. 57; 24; (2016); p. 2660 – 2663;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

69778-83-2, 4-Methoxy-1H-pyrrol-2(5H)-one is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,69778-83-2

EXAMPLE 3 (Z)-4-methoxy-5-propylidene-3-pyrrolin-2-one (IV, R2 =H, R3 =Me, R4 =Et) 23.9 g of 4-methoxy-3-pyrrolin-2-one (94.6 percent) in 1360 ml of 4 n sodium hydroxide solution and 13.2 g of propionaldehyde (97 percent) in 330 ml of methanol were reacted as described in Example 1. Data for the product was: Yield: 18.0 g (58.8 percent) Melting point: 119¡ã to 127¡ã C., colorless crystals 1 H-NMR: delta=8.62 (br.s, 1H) 5.43 (t, 1H), 5.12 (d,1H), 3.84 (s, 3H), 2.27 (m, 2H), 1.12 (t, 3H)

69778-83-2 4-Methoxy-1H-pyrrol-2(5H)-one 574769, apyrrolines compound, is more and more widely used in various.

Reference£º
Patent; Lonza, Ltd.; US4983743; (1991); A;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

69778-83-2, 4-Methoxy-1H-pyrrol-2(5H)-one is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,69778-83-2

Example 3 Interconversion Between Compounds (VI) A solution of 4-methoxy-3-pyrrolin-2-one (3 g; 26.52 mmols) in absolute ethanol (60 ml) is treated with sodium ethoxyde (2.17 g; 31.82 mmols) under nitrogen atmosphere. The solution is refluxed for 2 hours and then poured into a 30percent NaH2 PO4 solution (200 ml) The resulting mixture is extracted with ethyl acetate (3*150 ml) and the organic phase is shacked with brine, dried over sodium sulphate and evaporated to dryness to obtain 4-ethoxy-3-pyrrolin-2-one (2.19 g; 17.24 mmols). Yield: 65percent. 1 NMR (400 mhz, CDCl3), ppm: 1.38 (3H, t), 3.89 (2H, s), 4.01 (2H, q), 5.03 (1H, s), 6.15 (1H, bs).

69778-83-2 4-Methoxy-1H-pyrrol-2(5H)-one 574769, apyrrolines compound, is more and more widely used in various.

Reference£º
Patent; Pharmacia & UpJohn S.p.A.; US5847127; (1998); A;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

73286-71-2, N-Boc-2-pyrroline is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,73286-71-2

General procedure: To a stirred solution of p-chlorobenzaldehyde, 6 (1.16 g, 8.25 mmol) and aniline 5 (1.83 g, 8.23 mmol) in anhydrous CH3CN (30 mL), 4 A molecular sieves and Sc(OTf)3 (0.81 g, 1.65 mmol) were added. The mixture was stirred at room temperature under argon atmosphere for 5 min and then treated with a solution of enamine 4 (1.50 g, 8.01 mmol) in anhydrous CH3CN (16 mL). The resulting suspension was stirred at room temperature under argon atmosphere for 3 days. Then, the resulting mixture was diluted with sat. aq. NaHCO3 (150 mL) and extracted with EtOAc (3 * 200 mL). The combined organic extracts were dried over anhydrous Na2SO4 and evaporated under reduced pressure to give a solid residue (4.71 g), mainly consisting of a diastereomeric mixture of octahydrobenzonaphthyridines 7, which was used in the next step without further purification. To a solution of crude diastereomeric mixture 7 (4.58 g of a crude of 4.71 g) in anhydrous CHCl3 (150 mL), DDQ (4.85 g, 21.4 mmol) was added. The reaction mixture was stirred at room temperature under argon atmosphere overnight, diluted with CH2Cl2 (150 mL) and washed with sat. aq. NaHCO3 (3 * 250 mL). The combined organic extracts were dried over anhydrous Na2SO4 and evaporated under reduced pressure to give a solid residue (5.33 g), which was purified through column chromatography (35-70 mum silica gel, hexane/EtOAc mixtures, gradient elution). On elution with hexane/1-Benzyl-9-(tert-butoxycarbonylaminomethyl)-5-(4-chlorophenyl)-1,2,3,4-tetrahydro-2-oxobenzo[h][1,6]naphthyridine 8EtOAc 80:20, compound 8 (1.94 g, 47% yield) was isolated as a white solid; Rf 0.83 (hexane/EtOAc 1:1). A solution of 8 (30 mg, 0.06 mmol) in CH2Cl2 (5 mL) was filtered through a 0.2 mum PTFE filter and evaporated at reduced pressure. The solid was washed with pentane (3 * 5 mL) to give, after drying under standard conditions, the analytical sample of 8 (27 mg):

73286-71-2 N-Boc-2-pyrroline 10844857, apyrrolines compound, is more and more widely used in various.

Reference£º
Article; Di Pietro, Ornella; Vicente-Garcia, Esther; Taylor, Martin C.; Berenguer, Diana; Viayna, Elisabet; Lanzoni, Anna; Sola, Irene; Sayago, Helena; Riera, Cristina; Fisa, Roser; Clos, M. Victoria; Perez, Belen; Kelly, John M.; Lavilla, Rodolfo; Munoz-Torrero, Diego; European Journal of Medicinal Chemistry; vol. 105; (2015); p. 120 – 137;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1122-10-7,3,4-Dibromo-1H-pyrrole-2,5-dione,as a common compound, the synthetic route is as follows.,1122-10-7

To a stirred solution of 2,3-dibromomaleimide (255 mg, 1.0 mmol) in CH2Cl2 (20 mL) Et3N(2.0 mmol, 278 mL) and 1-mercapto-11-hydroxy-3,6,9-trioxaundecane (402 ml, 2.1 mmol) were added under an argon atmosphereand stirred for 3 h at room temperature. The reactionmixturewas evaporated, and the crude product was converted intoN-ethoxycarbonyl compound and worked up according to generalmethod A yielding compound 32b which was used in further stepswithout purification

As the paragraph descriping shows that 1122-10-7 is playing an increasingly important role.

Reference£º
Article; Sz?cs, Zsolt; Kelemen, Viktor; Le Thai, Son; Csavas, Magdolna; R?th, Erzsebet; Batta, Gyula; Stevaert, Annelies; Vanderlinden, Evelien; Naesens, Lieve; Herczegh, Pal; Borbas, Aniko; European Journal of Medicinal Chemistry; vol. 157; (2018); p. 1017 – 1030;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

134272-64-3, N-(2-Aminoethyl)maleimide Hydrochloride is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,134272-64-3

To a solution of NHS ester, 7a (5 mg, 4.82 muetaiotaomicron) and l-(2-aminoethyl)-lH- pyrrole-2,5-dione hydrochloride (1.7 mg, 9.64 muiotaetaomicron) in anhydrous dichloromethane (200 mu) was added DIPEA (1.512 mu, 8.68 muiotaetaomicron) under nitrogen. The mixture was stirred at room temperature for 4 hours and then concentrated in vacuo. The resulting residue was purified by RP-HPLC (CI 8, CH3CN / H20). Fractions containing desired product were frozen and lyophilized to give maleimide, compound D7 (3.5 mg, 68% yield). LCMS = 4.61 min (15 min method). MS (m z): 1062.8 (M + 1)+.

As the paragraph descriping shows that 134272-64-3 is playing an increasingly important role.

Reference£º
Patent; IMMUNOGEN, INC.; MACROGENICS, INC.; HICKS, Stuart William; YODER, Nicholas C.; BARAT, Bhaswati; BONVINI, Ezio; DIEDRICH, Gundo; JOHNSON, Leslie S.; LOO, Deryk; SCRIBNER, Juniper A.; (260 pag.)WO2018/119196; (2018); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.17057-04-4,4-(2,5-Dioxo-2,5-dihydro-pyrrol-1-yl)-benzoicacid,as a common compound, the synthetic route is as follows.,17057-04-4

General procedure: Equimolar quantities of maleimide (2) and nitrones (5a-k and 6a-k) were refluxed in toluene (20 ml) and ethyl alcohol (5 ml) for 8-10 h (TLC monitoring using petroleum ether and hexane 1:1) followed by cooling with addition of dry ether. The products (7a-k and 8a-k) were separated out after filtration and recrystallized from toluene and petroleum ether mixture (1:1) to yield cis-isomers (7aa-7ka and 8aa-8ka). The mother liquor on further work up provided trans-isomers which were recrystallized from ethanol and diethyl ether mixture (1:1) (7aa’-7ka’ and 8aa’-8ka’) (Fig. 3).7 These stereoisomers were characterized by their 1H NMR, IR and mass spectra in addition to their melting points and elementary analysis. These stereoisomers have identical IR spectra and elemental analysis but differ in their melting points, 1H NMR and mass spectra.

As the paragraph descriping shows that 17057-04-4 is playing an increasingly important role.

Reference£º
Article; Anand, Preet; Singh, Baldev; Bioorganic and Medicinal Chemistry; vol. 20; 1; (2012); p. 521 – 530;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.73286-71-2,N-Boc-2-pyrroline,as a common compound, the synthetic route is as follows.,73286-71-2

tert-butyl-(3-trimethylsilylethynyl)-3a,4, 5,6a-tetrahydropyrrolo[3,2-d]isoxazole-6-carboxylate (Intermediate 20b, alternative procedure) A solution of tert-butyl 2,3-dihydropyrrole-1-carboxylate (500 mg, 2.95 mmol) and 3-trimethylsilylprop-2-ynal oxime (459.06 mg, 3.25 mmol) in MTBE (15 mL) was cooled to 0-5 C. while stirring. Sodium hypochlorite (2.806 mL, 5.91 mmol) was added dropwise keeping the reaction temperature below 20 C. The reaction mixture was stirred at the same temperature for 3 hours; afterwards, it was quenched with Na2SO3 solution; the two phases were separated, the organic layer was washed with water and brine, dried over Na2SO4, filtered and evaporated to dryness in vacuo. The crude residue was purified by automated flash chromatography (Biotage SP1, cartridge type SNAP25) using a gradient from petroleum ether:EtOAc 95:5 to 7:3.

As the paragraph descriping shows that 73286-71-2 is playing an increasingly important role.

Reference£º
Patent; Recordati Ireland Ltd.; Riva, Carlo; De Toma, Carlo; Angelico, Patrizia; Poggesi, Elena; Graziani, Davide; (36 pag.)US2016/185798; (2016); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem