Tag: M.W:200-300

1122-10-7, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. An updated downstream synthesis route of 1122-10-7 as follows.

Example 2 Synthesis of 39-(3,4-dibromo-2,5-dioxopyrrolyl)-3,6,9,12,15,18,21,24,27,30,33,36-dodecaoxanonatriacontanoic acid A 100 mL two-necked round bottom flask was flame dried and cooled under nitrogen. The cooled flask was charged with 200 mg (0.296 mmol) of tert-butyl 39-hydroxy-3,6,9,12,15,18,21,24,27,30,33,36-dodecaoxanonatriacontanoate. Triphenylphosphine, 106 mg, was dissolved in about 5 mL anhydrous tetrahydrofuran in a vial, and the solution was added to the 100 mL flask via cannula under nitrogen. The 100 mL flask was cooled in an ice-water bath for 15 minutes. To the cooled solution was added 55 mg (0.217 mmol) 3,4-dibromopyrrole-2,5-dione with stirring until a clear solution was observed. DIAD, 58.3 muL, was added to the cooled reaction mixture, which was stirred in the ice bath for an additional 10 minutes. The reaction mixture was stirred and allowed to reach room temperature over about 20 hours, then concentrated on a rotary evaporator until dry, giving a yellow viscous oil, which was absorbed onto about 1 g silica gel and dry-loaded onto a Reveleris normal phase chromatography unit. The oil was eluted over a 12 g silica gel cartridge with a methanol:dichloromethane gradient from 1:0 to 9:1 over 28 column volumes. The fractions containing the desired product were pooled and concentrated to dryness. The purified product was suspended in 50:50 acetonitrile:water and lyophilized overnight to provide a clear light yellow viscous oil., 1122-10-7

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1122-10-7, you can also browse my other articles.

Reference£º
Patent; Igenica Biotherapeutics, Inc.; Jackson, David Y.; Ha, Edward; Probst, Gary D.; US2014/363454; (2014); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione, introduce a new downstream synthesis route., 1122-10-7

Synthesis of 1-(2-(2-azidoethoxy)ethyl)-3,4-dibromo-1H-pyrrole-2,5-dione To 2.5 g of 3,4-dibromo-1H-pyrrole-2,5-dione (10 mmol) and 1 g of NMM in 60 mL of THF, MeOCOCl (10 mmol, 940 mg in 10 ml DCM) was added dropwise, stirred for 20 min, then the reaction solution was diluted with 6o mL of DCM, washed 3 time by water, the organic phase was stirred by sodium sulfate anhydrous, concentrated, 2.65 g of methyl 3,4-dibromo-2,5-dioxo-2H-pyrrole-1(5H)-carboxylate was obtained. 311 mg, 1 mmol of this compound, 2-(2-azidoethoxy)ethanamine (130 mg, 1 mmol) and 5 mL DCM was added, TLC shown the reaction finished in 20 min, then extracted by DCM and brine, washed by NH4Cl solution, dried on sodium sulfate anhydrous, and then concentrated for column purification, flashed by 2:1 hexane and ethyl ethylate, 230 mg of 1-(2-(2-azidoethoxy)ethyl)-3,4-dibromo-1H-pyrrole-2,5-dione obtained. 1HNMR: 3.32 ppm (t, J=5.0 Hz, 1H), 3.40 ppm (t, J=5.0 Hz, 1H), 3.50 ppm (q, J=5.0 Hz, 1H), 3.62 ppm (t, J=5.0 Hz, 1H), 3.63-3.69 ppm (m, 3H), 3.84 ppm (t, J=5 hz, 1H). Fw: 365.9, C8H8Br2N4O3; Mass Peaks (1:2:1): 366.9, 368.9, 370.9., 1122-10-7

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 1122-10-7. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Sorrento Therapeutics, Inc.; Fu, Yanwen; Kaufmann, Gunnar F.; Jones, Bryan; Toughiri, Rahaleh; (27 pag.)US2016/326266; (2016); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. An updated downstream synthesis route of 1122-10-7 as follows., 1122-10-7

General procedure: To the solution of dibromomaleimide 1a orN-methyldibromomaleimide 1b (1 mmol) in THF (20 ml)was added solution of the thiophenol (2.2 mmol) and triethylamine(2.2 mmol) in one portion. The resulting solutionwas stirred at room temperature for 1 h, then evaporated invacuo and the residue was redissolved in ethyl acetate-water(20 + 20 ml) mixture. The organic layer was separated,washed with aq. NaHCO3, dried over anhydrous Na2SO4and evaporated. The residue was purified by flash chromatography(ethyl acetate: petroleum ether 3:1)., 1122-10-7

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 3,4-Dibromo-1H-pyrrole-2,5-dione, you can also browse my other articles.

Reference£º
Article; Panov, Alexey A.; Lavrenov, Sergey N.; Simonov, Alexander Y.; Mirchink, Elena P.; Isakova, Elena B.; Trenin, Alexey S.; Journal of Antibiotics; vol. 72; 2; (2019); p. 122 – 124;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 21724-96-9, name is 3-(4-Bromophenyl)-1H-pyrrole-2,5-dione, introduce a new downstream synthesis route., 21724-96-9

Preparation 2: (1/?,5S/1S,5/?)-1-(4-bromophenyl)-3-azabicyclo[3.1.0]hexane-2,4- dione (P2) Milled potassium hydroxide (6.29 g) was added in small portions to a stirred solution of trimethylsulfoxonium iodide (24.66 g) in anhydrous DMSO (224 mL). The resulting mixture was allowed to stir at room temperature for 1.5 h then 3-(4-bromophenyl)-1 H-pyrrole-2,5- dione (P1 , 14.12 g) dissolved in DMSO (90 mL) was then added dropwise and the resulting mixture was allowed to stir at room temperature for 20 minutes. Reaction temperature was brought to 0 ¡ãC and aqueous saturated NH4CI (150 mL) was slowly added, followed by Et2O (200 mL). After separation of the two phases, the aqueous layer was repeatedly extracted with Et2O (3 x 100 mL). Combined organic layers were washed with brine and then dried over Na2SO4. Evaporation of the solvent gave the crude title compound (9.61 g) which was used without further purification.MS (mlz): 265.1 [M-H]”., 21724-96-9

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 21724-96-9. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; GLAXO GROUP LIMITED; WO2007/22935; (2007); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.57079-01-3, name is 11-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)undecanoic acid. A new synthetic method of this compound is introduced below., 57079-01-3

A two-neck, 500 mL flask was charged with 26.24 g (0.1 mole) pentacyclopentadecane dimethanol, 9.04 g (0.105 mole) methacrylic acid, 29.54 g (0.105 mole) maleimidoundecanoic acid, 150 mL toluene, 2.0 g methanesulfonic acid, and 60 mg hydroquinone. A magnetic stir bar was placed in the flask and a gas inlet tube, Dean-Stark trap and condenser were attached. The mix was refluxed under an air sparge for 3.5 hours and 3.7 mL water (3.6 mL theoretical yield) was collected in the trap. The mixture was cooled to room temperature and neutralized with a mix of 15 g sodium bicarbonate and 5 mL water. The mix was dried with 12 g anhydrous magnesium sulfate and then passed over 20 g of silica gel. The bulk of the toluene was removed under vacuum on a rotary evaporator. The last trace of solvent was removed using an air sparge. The final product was a viscous, clear, red liquid that had a 40 C. viscosity of 3,028 centipoise. The product weighed 55.12 g (92.8% of theoretical yield). Thermogravimetric analysis (TGA) was performed on the compound (ramp rate of 10 C. per minute in air) and the retained weight was 100.0% and 99.9% at 200 C. and 300 C., respectively. The decomposition onset was 432.8 C. An FTIR was run on this compound and significant absorptions were found at 2925, 1714, 1638, 1407, 1172, 827, and 695 wavenumbers.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 57079-01-3, you can also browse my other articles.

Reference£º
Patent; Designer Molecules, Inc.; US8039663; (2011); B2;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

17057-04-4, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.17057-04-4, name is 4-(2,5-Dioxo-2,5-dihydro-pyrrol-1-yl)-benzoicacid. Here is a downstream synthesis route of the compound 17057-04-4

General procedure: Equimolar quantities of maleimide (2) and nitrones (5a-k and 6a-k) were refluxed in toluene (20 ml) and ethyl alcohol (5 ml) for 8-10 h (TLC monitoring using petroleum ether and hexane 1:1) followed by cooling with addition of dry ether. The products (7a-k and 8a-k) were separated out after filtration and recrystallized from toluene and petroleum ether mixture (1:1) to yield cis-isomers (7aa-7ka and 8aa-8ka). The mother liquor on further work up provided trans-isomers which were recrystallized from ethanol and diethyl ether mixture (1:1) (7aa’-7ka’ and 8aa’-8ka’) (Fig. 3).7 These stereoisomers were characterized by their 1H NMR, IR and mass spectra in addition to their melting points and elementary analysis. These stereoisomers have identical IR spectra and elemental analysis but differ in their melting points, 1H NMR and mass spectra.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 17057-04-4

Reference£º
Article; Anand, Preet; Singh, Baldev; Bioorganic and Medicinal Chemistry; vol. 20; 1; (2012); p. 521 – 530;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

1122-10-7, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. Here is a downstream synthesis route of the compound 1122-10-7

General procedure: To a stirred solution of 2,3-dibromomaleimide23 (1.0 mmol) in CH2Cl2 (20ml) Et3N (2.0mmol) and thiol (2.1mmol) were added under argon atmosphere and stirred for 3 h at room temperature. The reaction mixture was evaporated,and the crude product was purified by flash chromatography to give the desired compound., 1122-10-7

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 3,4-Dibromo-1H-pyrrole-2,5-dione. We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Csavas, Magdolna; Miskovics, Adrienn; Szcs, Zsolt; Rth, Erzsebet; Nagy, Zsolt L; Bereczki, Ilona; Herczeg, Mihaly; Batta, Gyula; Nemes-Nikodem, Eva; Ostorhazi, Eszter; Rozgonyi, Ferenc; Borbas, Aniko; Herczegh, Pal; Journal of Antibiotics; vol. 68; 9; (2015); p. 579 – 585;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

31970-04-4, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.31970-04-4, name is Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate, below Introduce a new synthetic route.

To a solution of N-carbobenzoxy-3-pyrroline (1.00 g, 4.92 mmol, 1.0 eq) in acetone (20 mL) was added NMO (1.0 g, 7.38 mmol, 1.5 eq) followed by OsO4 (cat. 10 mg in 1 mL iPrOH). The mixture was stirred for 3 h. To this, saturated NaHSO3 aqueous solution (5 mL) was added, and the mixture was stirred for another 0.5 h. The organic phase was separated from the mixture, and the water phase was extracted with EtOAc (20 mL¡Á3). The combined organic phases were dried over anhydrous Na2SO4 and filtered. The filtrate was concentrated in vacuo and the residue was purified by a silica gel column chromatography (EtOAc) to give the compound as colorless oil (1.16 g, 100percent).

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 31970-04-4, you can also browse my other articles.

Reference£º
Patent; SUNSHINE LAKE PHARMA CO., LTD.; Zhang, Jiancun; Zhang, Yingjun; Zhang, Weihong; Liu, Bing; Zhang, Jiquan; Liu, Jinlei; Zhang, Lu; US2014/228361; (2014); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

1122-10-7, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. An updated downstream synthesis route of 1122-10-7 as follows.

General procedure: To a solution of N-R-maleimide (10 mmol) in CCl4 (15 mL) was added dropwise a solution of Br2 (0.57 mL, 11 mmol) in CCl4 (10mL) at rt After the addition is completed, the reaction mixture was refluxed for 1 h and then cooled to room temperature. The solvent was evaporated in vacuo to give the crude trans-2,3-Dibromo-N-R-succinimide as pale-yellow solid. The crude succinimide was dissolved in THF (30 mL) and triethylamine (1.40 mL, 11 mmol) in THF (5 mL) was added dropwise at 0 oC.The resulting mixture was allowed to warm to room temperature and stirred for two h before concentrated in vacuo. The residue was dissolved in EtOAc and washed with H2O and brine. The organic layer was dried with anhydrous Na2SO4 and evaporated in vacuo to give bromo-N-R-maleimide (1)as pale-yellow solid with good yields., 1122-10-7

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 3,4-Dibromo-1H-pyrrole-2,5-dione, you can also browse my other articles.

Reference£º
Article; Li, Xiangmin; Li, Hongxian; Yang, Wei; Zhuang, Jinchen; Li, Hao; Wang, Wei; Tetrahedron Letters; vol. 57; 24; (2016); p. 2660 – 2663;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

17057-04-4, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.17057-04-4, name is 4-(2,5-Dioxo-2,5-dihydro-pyrrol-1-yl)-benzoicacid. An updated downstream synthesis route of 17057-04-4 as follows.

In 150 mL beaker, compound F1 (0.5 g, 0.0023 mmol), 20 mLof dimethyl sulfoxide (DMSO) and 0.034 mmol of SOCl2 weremixed and heated on hot plate using magnetic stirrer at 20 C,and then added triethylamine (1.815 g, 0.0179 mmol) after 20min. Finally, added sulfadiazine (0.575 g, 0.0023 mmol/chlorodizepoxide (0.688 g, 0.0023 mmol) into the mixture with constantstirring at 30 C for 30 min. The mixture was cooled on icebath and leave until the precipitate was formed, filtered and drythe product (Schemes II and III) [22]. The reaction processwas monitored by TLC.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 17057-04-4, you can also browse my other articles.

Reference£º
Article; Mageed, Fatimah Abdul Razzak; Kareem, Mohanad Musa; Al-Baiati, Mohammad N.; Asian Journal of Chemistry; vol. 31; 3; (2019); p. 569 – 574;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem