Tag: M.W:200-300

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.31970-04-4, name is Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate. Here is a downstream synthesis route of the compound 31970-04-4. 31970-04-4

Epoxidation of benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate To a solution of benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate (33 g, 163 mmol; 90% from Aldrich) in dichloromethane (540 mL, 0.3 M solution) was added MCPBA (44 g, 340 mmol, 77% from Aldrich). After the reaction mixture was stirred at room temperature for 18 h, 500 mL of saturated Na2CO3 aqueous solution was added and the resulting mixture was stirred at room temperature for 1 h. The organic layer was separated, washed with water and brine, dried over anhydrous Na2SO4, filtered, and concentrated in vacuo. The desired product as a yellow oil was obtained in 83% yield (29.5 g) by flash column chromatography. 1H NMR (CDCl3, 400 MHz): delta 3.38 (2H, m), 3.68 (2H, m), 3.87 (2H, m), 5.11 (2H, s), 7.33 (5H, m). LC/MS (uplc): MH+ 220.0, 0.69 min.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 31970-04-4

Reference£º
Patent; ABRAMS, Tinya; BARSANTI, Paul A.; DING, Yu; DUHL, David; HAN, Wooseok; HU, Cheng; PAN, Yue; US2011/256128; (2011); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

1122-10-7, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. A new synthetic method of this compound is introduced below.

General procedure: Dibromomaleimide 1a, 2.0 g (7.84 mmol), was dissolved in 15 mL of anhydrous DMF, and 0.9 mL (9.51 mmol) of 4-fluoroaniline and 2 mL (11.5 mmol) of DIPEA were added. The mixture was stirred for 24 h at 50C and poured into a mixture of water and ethyl acetate. The organic layer was separated, washed with dilute aqueous HCl, and evaporated under reduced pressure, and the residue was purified by column chromatography using petroleum ether-ethyl acetate (5 : 1) as eluent.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 3,4-Dibromo-1H-pyrrole-2,5-dione. We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Panov; Simonov, A. Yu.; Korolev; Russian Journal of Organic Chemistry; vol. 55; 12; (2019); p. 1847 – 1852; Zh. Org. Khim.; vol. 55; 12; (2019); p. 1850 – 1856,7;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

31970-04-4, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.31970-04-4, name is Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate. A new synthetic method of this compound is introduced below.

EXAMPLE 58; 2-(4-Chlorophenyl)-5-(6-((3i?,4i?)-3-hydroxy-4-(methylamino)pyrrolidin-l- yl)pyridin-3-yl)-4,5-dihydropyrrolo[3,4-c]pyrazol-6(2H)-one; Example 58A. Benzyl 6-oxa-3-azabicyclo[3.1.0]hexane-3-carboxylate; [00268] A solution of benzyl 2,5-dihydro-lH-pyrrole-l-carboxylate (2 g, 9.8 mmol) in dichloromethane (50 niL) was cooled to 0 0C and m-CPBA (2.7 g, 11.8 mmol) was added over a period of 20 min. The reaction was stirred at room temperature for 2 days while a solid precipitated out of the solution. The solid was filtered off and the filtrate was successively washed with sat. aq. NaHSO3, 5% aq. K2CO3, and brine, dried over anhydrous Na2SO4 and then concentrated in vacuo. The residue was purified by flash chromatography (5 to 60% ethyl acetate:hexanes) to afford Example 58A (1.5 g, 70 % yield). LC-MS, [M+H]+ = 220. 1H NMR (CDCl3, 400 MHz) delta 7.28 – 7.41 (m, 5 H), 5.12 (2d, J= 3.5 Hz, 2 H), 3.81 – 3.93 (m, 2 H), 3.66 – 3.71 (m, 2 H), 3.39 (m, 2 H)., 31970-04-4

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; DEVASTHALE, Pratik; WASHBURN, William, N.; WANG, Wei; HERNANDEZ, Andres; AHMAD, Saleem; ZHAO, Guohua; WO2010/47956; (2010); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. A new synthetic method of this compound is introduced below., 1122-10-7

To a solution of 3,4-dibromomaleimide (1.00g, 3.9mmol) and N-methylmorpholine (0.43ml_, 3.90mmol) in THF (50ml_), methylchloroformate (0.30ml_, 3.90mmol) was added and the mixture was stirred for 20minutes at room temperature. To this mixture, dichloromethane (DCM, 40ml_) was added and the organic phase was washed with water (3x100ml_), dried with MgS04. The solvent was removed in vacuo to yield the titled product as a purple powder. 1H NMR (CDCIs, 300MHz) d (ppm): 4.01 (3H, s, COCH3). 13C NMR(CDCI3, 75MHz) d (ppm): 131 .4(C=C), 54.8 (COCH3)., 1122-10-7

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1122-10-7, you can also browse my other articles.

Reference£º
Patent; UNILEVER PLC; UNILEVER N.V.; CONOPCO, INC., D/B/A UNILEVER; KHOSHDEL, Ezat; BATES, Susan; HAND, Rachel, Alice; HADDLETON, David, Mark; KIRBY, Gavin, William; (20 pag.)WO2019/201787; (2019); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. Here is a downstream synthesis route of the compound 1122-10-7. 1122-10-7

To a stirred solution of 2,3-dibromomaleimide (510 mg, 2.0 mmol) in CH2Cl2 (20 mL) Et3N(558 mL, 4.0 mmol) and n-hexyl-mercaptan (600 ml, 4.2 mmol) wereadded under an argon atmosphere and stirred for 3 h at roomtemperature. The reaction mixture was evaporated, and the crudeproduct was purified by flash chromatography (hexanes:ethyl acetate 9:1) to give compound 6a (526 mg, 80%) as a yellow powder.1H NMR (400 MHz, CDCl3): d 7.88 (s, 1H), 3.28 (t, J 7.4 Hz, 4H,2 x -SCH2), 1.70e1.59 (m, 4H, CH2), 1.47e1.37 (m, 4H), 1.35e1.24 (m,8H), 0.89 (t, J 6.7 Hz, 6H, 2x CH3). 13C NMR (101 MHz, CDCl3):d 166.6 (2C); 136.8 (CC); 31.9, 31.4, 30.6, 28.3 (8C, 8x CH2); 22.6(2C, 2 x CH2S); 14.1 (2C, 2x CH3). MS (ESI): m/z calculated forC16H27NO2S2 Na [M Na]: 352.138. Found: 352.201.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 1122-10-7

Reference£º
Article; Sz?cs, Zsolt; Kelemen, Viktor; Le Thai, Son; Csavas, Magdolna; R?th, Erzsebet; Batta, Gyula; Stevaert, Annelies; Vanderlinden, Evelien; Naesens, Lieve; Herczegh, Pal; Borbas, Aniko; European Journal of Medicinal Chemistry; vol. 157; (2018); p. 1017 – 1030;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

31970-04-4, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.31970-04-4, name is Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate. An updated downstream synthesis route of 31970-04-4 as follows.

Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate (2 g, 9.84 mmol) was taken in THF (16 mL) and water (6 mL), to it OsO4 (25 mg, 0.098 mmol), NMO (1.6 g, 13 mmol) were added. The reaction mixture was stirred at room temperature for 15 h. The reaction mixture was concentrated and the crude was partitioned between EtOAc and water. Layers were separated and the aqueous layer was extracted with EtOAc. The combined organic layer was dried over Na2SO4, concentrated and purified by column chromatography to yield the pure benzyl 3,4-dihydroxypyrrolidine-1-carboxylate (2.2 g, 95percent).

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; CORNELL UNIVERSITY; COFERON, INC.; PURDUE RESEARCH FOUNDATION; US2012/295874; (2012); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. Here is a downstream synthesis route of the compound 1122-10-7. 1122-10-7

Example 12 Preparation of Di-dansyl-cystamine-maleimide A round bottomed flask was charged with di-dansyl cystamine (100 mg, 0.16 mmol), TCEP (46 mg, 1 eq) and MeOH (10 ml). The reaction mixture was stirred at ambient temperature under argon for 3 hrs. Dibromomaleimide (36 mg, 0.9 eq), in MeOH (5 ml) was then added to the reaction mixture. After 30 mins NaOAc (56 mg, 4 eq), was added to the reaction mixture and the solvent evaporated in vacuo. The residue was worked up with DCM and brine. The organic layers were combined, dried (MgSO4), filtered and concentrated in vacuo. Purification by flash chromatography (silica gel, 0-20% EtOAc-DCM) afforded the desired compound as a yellow gum (40 mg, 40%). 1HNMR (CDCl3, 600 MHz), delta8.5 (2H, d J 8.5 Hz aromatic H’s), delta8.2 (4H, m aromatic H’s), delta7.53 (1H, s CONH), delta7.46 (4H, m, aromatic H’s), delta7.1 (2H, d, J=7.4 Hz aromatic H’s), delta5.65 (2H, t, J 6.27 SO2NH), delta3.3 (4H, t, J 6.0 SCH2), delta3.17 (4H, q, J 6.0 NHCH2), delta2.8 (12H, s NCH3); 13CNMR (CDCl3, 150 MHz), 6165.9, 152.0, 136.5, 134.7, 130.7, 129.94, 129.85, 129.62, 129.57, 128.63, 123.3, 118.8, 115.4, 45.5, 43.6, 31.8; IR (cm-1) 3288 (br) 1720 (s) MS (Na+) m/z relative intensity: 736 (M, 100); Exact mass calculated for [C32H35N5O6NaS4] requires m/z 736.1368. Found 736.1390 (Na+)., 1122-10-7

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 1122-10-7

Reference£º
Patent; UCL Business Plc; Smith, Mark; Caddick, Stephen; Baker, James; Chudasama, Vijay; (80 pag.)US9295729; (2016); B2;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

1122-10-7, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. An updated downstream synthesis route of 1122-10-7 as follows.

General procedure: To a stirred solution of 2,3-dibromomaleimide23 (1.0 mmol) in CH2Cl2 (20ml) Et3N (2.0mmol) and thiol (2.1mmol) were added under argon atmosphere and stirred for 3 h at room temperature. The reaction mixture was evaporated,and the crude product was purified by flash chromatography to give the desired compound.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 3,4-Dibromo-1H-pyrrole-2,5-dione, you can also browse my other articles.

Reference£º
Article; Csavas, Magdolna; Miskovics, Adrienn; Szcs, Zsolt; Rth, Erzsebet; Nagy, Zsolt L; Bereczki, Ilona; Herczeg, Mihaly; Batta, Gyula; Nemes-Nikodem, Eva; Ostorhazi, Eszter; Rozgonyi, Ferenc; Borbas, Aniko; Herczegh, Pal; Journal of Antibiotics; vol. 68; 9; (2015); p. 579 – 585;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. A new synthetic method of this compound is introduced below., 1122-10-7

General procedure: To a stirred solution of 2,3-dibromomaleimide23 (1.0 mmol) in CH2Cl2 (20ml) Et3N (2.0mmol) and thiol (2.1mmol) were added under argon atmosphere and stirred for 3 h at room temperature. The reaction mixture was evaporated,and the crude product was purified by flash chromatography to give the desired compound.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1122-10-7, you can also browse my other articles.

Reference£º
Article; Csavas, Magdolna; Miskovics, Adrienn; Szcs, Zsolt; Rth, Erzsebet; Nagy, Zsolt L; Bereczki, Ilona; Herczeg, Mihaly; Batta, Gyula; Nemes-Nikodem, Eva; Ostorhazi, Eszter; Rozgonyi, Ferenc; Borbas, Aniko; Herczegh, Pal; Journal of Antibiotics; vol. 68; 9; (2015); p. 579 – 585;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

31970-04-4, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.31970-04-4, name is Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate. A new synthetic method of this compound is introduced below.

Method 197 benzyl 6-oxa-3-azabicyclo[3.1.0]hexane-3-carboxylateTo a stirred mixture of benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate (5 g, 24.60 mmol) in DCM (80 mL) was added 3-chlorobenzoperoxoic acid (6.89 g, 30.75 mmol) at 0 C. The mixture was then stirred at rt overnight. The reaction mixture was then filtered through a bed of Celite and the filtrate was washed with sat’d aqueous Na2CO3 and brine. The organic was then separated and dried over anhydrous Na2SO4, filtered, and conc. in vacuo to yield the title compound that was used for next step without further purification., 31970-04-4

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 31970-04-4, you can also browse my other articles.

Reference£º
Patent; ASTRAZENECA AB; US2011/218182; (2011); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem