Tag: M.W:200-300

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.17057-04-4, name is 4-(2,5-Dioxo-2,5-dihydro-pyrrol-1-yl)-benzoicacid. A new synthetic method of this compound is introduced below., 17057-04-4

General procedure: Equimolar quantities of maleimide (2) and nitrones (5a-k and 6a-k) were refluxed in toluene (20 ml) and ethyl alcohol (5 ml) for 8-10 h (TLC monitoring using petroleum ether and hexane 1:1) followed by cooling with addition of dry ether. The products (7a-k and 8a-k) were separated out after filtration and recrystallized from toluene and petroleum ether mixture (1:1) to yield cis-isomers (7aa-7ka and 8aa-8ka). The mother liquor on further work up provided trans-isomers which were recrystallized from ethanol and diethyl ether mixture (1:1) (7aa’-7ka’ and 8aa’-8ka’) (Fig. 3).7 These stereoisomers were characterized by their 1H NMR, IR and mass spectra in addition to their melting points and elementary analysis. These stereoisomers have identical IR spectra and elemental analysis but differ in their melting points, 1H NMR and mass spectra., 17057-04-4

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 17057-04-4, you can also browse my other articles.

Reference£º
Article; Anand, Preet; Singh, Baldev; Bioorganic and Medicinal Chemistry; vol. 20; 1; (2012); p. 521 – 530;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.17057-04-4, name is 4-(2,5-Dioxo-2,5-dihydro-pyrrol-1-yl)-benzoicacid. An updated downstream synthesis route of 17057-04-4 as follows., 17057-04-4

General procedure: Equimolar quantities of maleimide (2) and nitrones (5a-k and 6a-k) were refluxed in toluene (20 ml) and ethyl alcohol (5 ml) for 8-10 h (TLC monitoring using petroleum ether and hexane 1:1) followed by cooling with addition of dry ether. The products (7a-k and 8a-k) were separated out after filtration and recrystallized from toluene and petroleum ether mixture (1:1) to yield cis-isomers (7aa-7ka and 8aa-8ka). The mother liquor on further work up provided trans-isomers which were recrystallized from ethanol and diethyl ether mixture (1:1) (7aa’-7ka’ and 8aa’-8ka’) (Fig. 3).7 These stereoisomers were characterized by their 1H NMR, IR and mass spectra in addition to their melting points and elementary analysis. These stereoisomers have identical IR spectra and elemental analysis but differ in their melting points, 1H NMR and mass spectra.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 4-(2,5-Dioxo-2,5-dihydro-pyrrol-1-yl)-benzoicacid, you can also browse my other articles.

Reference£º
Article; Anand, Preet; Singh, Baldev; Bioorganic and Medicinal Chemistry; vol. 20; 1; (2012); p. 521 – 530;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

1122-10-7, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. An updated downstream synthesis route of 1122-10-7 as follows.

To a stirred solution of 2,3-dibromomaleimide (255 mg, 1.0 mmol) in CH2Cl2 (20 mL) Et3N(2.0 mmol, 278 mL) and 1-mercapto-11-hydroxy-3,6,9-trioxaundecane (402 ml, 2.1 mmol) were added under an argon atmosphereand stirred for 3 h at room temperature. The reactionmixturewas evaporated, and the crude product was converted intoN-ethoxycarbonyl compound and worked up according to generalmethod A yielding compound 32b which was used in further stepswithout purification

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 3,4-Dibromo-1H-pyrrole-2,5-dione. We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Sz?cs, Zsolt; Kelemen, Viktor; Le Thai, Son; Csavas, Magdolna; R?th, Erzsebet; Batta, Gyula; Stevaert, Annelies; Vanderlinden, Evelien; Naesens, Lieve; Herczegh, Pal; Borbas, Aniko; European Journal of Medicinal Chemistry; vol. 157; (2018); p. 1017 – 1030;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.1122-10-7, name is 3,4-Dibromo-1H-pyrrole-2,5-dione. Here is a downstream synthesis route of the compound 1122-10-7. 1122-10-7

Ac-Arg-Arg-Arg-Arg-Cys-Pro-Leu-Tyr-Ile-Ser-Tyr-Asp-Pro-Val-Cys-Arg-Arg-Arg-Arg-NH2 (2 mg) was dissolved in Dulbecco’s phosphate buffered saline (5 mL, without Ca, Mg) and acetonitrile (5 mL). 3,4-dibromomaleimide (0.2 mg, 1 eq.) was added to the solution, and the mixture was stirred for 1 h at room temperature. To the resulting mixture was added H2O (10 mL) and the solution was filtered and applied to the preparative HPLC, and linear density gradient elution (60 min) was then performed with eluents A/B: 75:25-65:35 using eluent A: 0.1% TFA in water and eluent B: 0.1% TFA-containing acetonitrile on preparative HPLC using YMC-Actus Triart Prep C8-S S-10mum 20 nm column (30 ¡Á 250 mm); flow rate: 15 mL/min. The fractions containing the product were collected and lyophilized to give 1.6 mg of peptide 15 as a yellow powder; mass spectrum: (M + H)+ 2655.54 (calcd 2655.38). Elution time on RP-HPLC: 8.05 min. Elution conditions: YMC Triart C8 column (4.6 ¡Á 100 mm), linear density gradient elution with eluents A/B = 80/20-30/70 (25 min), using 0.1% TFA in water as eluent A and 0.1% TFA-containing acetonitrile as eluent B; flow rate: 1 mL/min., 1122-10-7

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 1122-10-7

Reference£º
Article; Niida, Ayumu; Sasaki, Shigekazu; Yonemori, Kazuko; Sameshima, Tomoya; Yaguchi, Masahiro; Asami, Taiji; Sakamoto, Kotaro; Kamaura, Masahiro; Bioorganic and Medicinal Chemistry Letters; vol. 27; 12; (2017); p. 2757 – 2761;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.31970-04-4, name is Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate. An updated downstream synthesis route of 31970-04-4 as follows., 31970-04-4

(i) 3,4-cis-Dihydroxy-pyrrolidine-1-carboxylic acid benzyl ester To a solution of benzyl 3-pyrroline-1-carboxylate (15 g, 90percent, 66.4 mmol) in 100 mL THF and 25 mL water was added osmium tetroxide (10 mL, 2.5 wt. percent solution in 2-methyl-2-propanol, 0.8 mmol) and 4-methylmorpholine N-oxide (8.56 g, 73 mmol) as solid. The mixture was stirred at room temperature overnight and concentrated in vacuo. The residue was re-dissolved in 300 mL ethyl acetate and washed with aqueous Na2SO3 (1.5 g in 100 mL water) solution and aqueous NaHCO3 solution and brine. The combined aqueous layer was extracted once with ethyl acetate (100 mL). The combined organic layer was dried over Na2SO4, filtered, and concentrated in vacuo. The crude was further purified by flash column chromatography eluding with 4-5percent MeOH in CH2Cl2 to give 15.26 g product as white solid (97percent yield). 1H NMR (300 MHz, CDCl3) delta7.34 (m, 5H), 5.11 (bs, 2H), 4.26 (m, 2H), 3.66 (m, 2H), 3.41 (m, 2H), 1.56 (bs, 2H).

Thank you very much for taking the time to read this article. If you are also interested in other aspects of Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate, you can also browse my other articles.

Reference£º
Patent; Romines III, William Henry; Kania, Robert Steven; Lou, Jihong; Cripps, Stephan; Zhou, Ru; He, Mingying; US2004/19065; (2004); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

57079-01-3, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.57079-01-3, name is 11-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)undecanoic acid. A new synthetic method of this compound is introduced below.

57079-01-3, S1, 28.1 g of undecylmaleimido-11-acid is added to 120 ml of thionyl chloride,The reaction solution was heated to reflux for 3 h until the bubbler had no gas, and the reaction was stopped.The reaction solution was concentrated to dryness.Obtaining a yellow solid without post-treatment, directly proceeding to the next reaction;

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 57079-01-3, you can also browse my other articles.

Reference£º
Patent; Suzhou Haofan Biological Co., Ltd.; Lv Minjie; Wang Guichun; Liu Min; (14 pag.)CN109535058; (2019); A;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.31970-04-4, name is Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate. Here is a downstream synthesis route of the compound 31970-04-4. 31970-04-4

(2) Benzyl 2,5-dihydropyrrole-1-carboxylate (25 g) was dissolved in chloroform (125 mL), and mCPBA (39 g) was slowly added with ice cooling. The mixture was stirred at room temperature for 1 day, then diluted with chloroform, and washed with saturated aqueous sodium thiosulfate and saturated aqueous sodium hydrogencarbonate. The organic layer was dried with anhydrous sodium sulfate, then the desiccant was removed by filtration, the filtrate was concentrated under reduced pressure, and the residue was purified by silica gel column chromatography (hexane/ethyl acetate = 8:2-1:99) to obtain benzyl 6-oxa-3-azabicyclo[3.1.0]hexane-3-carboxylate (18 g). MS: ESI+ (m/z) 242 (M++Na)

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 31970-04-4

Reference£º
Patent; Taisho Pharmaceutical Co. Ltd.; Nissan Chemical Industries, Ltd.; EP2003131; (2008); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.17057-04-4, name is 4-(2,5-Dioxo-2,5-dihydro-pyrrol-1-yl)-benzoicacid. Here is a downstream synthesis route of the compound 17057-04-4. 17057-04-4

General procedure: Equimolar quantities of maleimide (2) and nitrones (5a-k and 6a-k) were refluxed in toluene (20 ml) and ethyl alcohol (5 ml) for 8-10 h (TLC monitoring using petroleum ether and hexane 1:1) followed by cooling with addition of dry ether. The products (7a-k and 8a-k) were separated out after filtration and recrystallized from toluene and petroleum ether mixture (1:1) to yield cis-isomers (7aa-7ka and 8aa-8ka). The mother liquor on further work up provided trans-isomers which were recrystallized from ethanol and diethyl ether mixture (1:1) (7aa’-7ka’ and 8aa’-8ka’) (Fig. 3).7 These stereoisomers were characterized by their 1H NMR, IR and mass spectra in addition to their melting points and elementary analysis. These stereoisomers have identical IR spectra and elemental analysis but differ in their melting points, 1H NMR and mass spectra.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 17057-04-4

Reference£º
Article; Anand, Preet; Singh, Baldev; Bioorganic and Medicinal Chemistry; vol. 20; 1; (2012); p. 521 – 530;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.31970-04-4, name is Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate. A new synthetic method of this compound is introduced below., 31970-04-4

The title compound of Step 1 (3.0 g, 15 mmol) was dissolved in a mixture of acetonitrile (100 mL) and water (70 mL) containing ethylenediamine tetraacetate, disodium salt dihydrate (11 mg, 0.03 mmol). The solution was cooled to 0 C. and 1,1,1-trifluoroacetone (14.5 mL, 160 mmol) was added over 10 min. Potassium peroxymonosulfate (45 g, 74 mmol) was added portionwise over 40 min while maintaining the pH at 7 by adding sodium bicarbonate. The mixture was stirred at 0 C. for 1.5 hr then poured into water and extracted with dichloromethane. The combined extracts were dried over magnesium sulfate and concentrated to a colorless oil (3.45 g, 100%)., 31970-04-4

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 31970-04-4, you can also browse my other articles.

Reference£º
Patent; Pfizer Inc; US2005/256310; (2005); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

31970-04-4, Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution OF BENZYL-2, 5-DIHYDRO-LH-PYRROLE-L-CARBOXYLATE (10. OG, 49. 3MMOL) in THF (200mL) was treated with osmium tetroxide solution (2.5percent in TERT-BUTANOL, 5ML) and N-METHYLMORPHOLINE (6.90g, 59. 0MMOL) and the reaction mixture stirred at rt under argon for 72h. Aqueous sodium thiosulfate solution (10percent, 200mL) was added and the mixture stirred for a further lh and then concentrated in vacuo. The resulting aqueous layer was extracted with ethyl acetate (3 x 200mL) and the combined organic layers washed with aqueous sodium thiosulfate solution (10percent, 300mL) and hydrochloric acid (LN, 300mL). The organic fraction was dried (MgS04) and concentrated in vacuo to give the title compound as an off-white solid. ON (CDCl3): 2. 67 (2H, br s), 3.38-3. 45 (2H, m), 3.63-3. 67 (2H, m), 4.22-4. 26 (2H, M), 5.12 (2H, s), 7.30-7. 38 (5H, m); m/z (ES+) = 238 [M+ H] +., 31970-04-4

31970-04-4 Benzyl 2,5-dihydro-1H-pyrrole-1-carboxylate 643471, apyrrolines compound, is more and more widely used in various fields.

Reference£º
Patent; OSI PHARMACEUTICALS, INC.; WO2004/104001; (2004); A2;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem